Primera Bravo SE-3 Manual

Primera Ikke kategoriseret Bravo SE-3

Læs gratis den danske manual til Primera Bravo SE-3 (56 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 129 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 65 anmeldelser. Har du et spørgsmål om Primera Bravo SE-3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/56

071816-510963

User's Manual

For the most recent version of this manual please visit

http://www.primera.com/manuals.html

Notices: The information in this document is subject to change without notice. NO WARRANTY OF

ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. No liability is assumed for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material. This document

contains proprietary information that is protected by copyright. All rights are reserved. No part of

this document may be photocopied, reproduced, or translated into another language without prior

written consent.

Trademark Acknowledgments: Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Printing History

FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

For Users in the United States: This product is intended to be supplied by a UL listed Direct Plug-

In Power Supply marked "Class 2"or a UL listed ITE Power Supply marked "LPS" with output rated

12VDC, 4.5A or higher. This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. In a domestic environment this product

may cause radio interference, in which case the user may be required to take adequate measures. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cables is required to comply with the Class B limits of Part 15 of the FCC Rules. You

are cautioned that any changes or modifications not expressly approved in this manual could void

your authority to operate and/or obtain warranty service for this equipment.

For Users in Canada: This digital apparatus does not exceed the Class B limits for radio noise for

digital apparatus set out on the Radio Interference Regulations of the Canadian Department of

Communications. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les

limites applicables aux appareils numeriques de la class A prescrites dans le Reglement sur le

brouillage radioelectrique edicte par le ministere des Communications du Canada.

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR

MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE EXTERIOR

PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL. OPERATE THE UNIT WITH ONLY THE PROPER ELECTRICAL

SPECIFICATIONS AS LABELED ON THE PRINTER AND AC ADAPTER.

CAUTION!

THIS PRODUCT CONTAINS A LASER DIODE OF A HIGHER CLASS THAN 1. TO ENSURE

CONTINUED SAFETY, DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO

THE INSIDE OF THIS PRODUCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. THE

FOLLOWING LABEL APPEARS INSIDE YOUR UNIT:

CLASS 1 LASER PRODUCT LASER KLASSE 1

CAUTION!

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION.

Produkt Specifikationer

Mærke:	Primera
Kategori:	Ikke kategoriseret
Model:	Bravo SE-3

Har du brug for hjælp?

Hvis du har brug for hjælp til Primera Bravo SE-3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Primera Manualer

Primera Bravo 4200 Series Manual

26 Juli 2025

Primera Bravo 4052 Manual

3 September 2024

Primera Bravo 4201 Manual

3 September 2024

Primera Bravo SE-3 Manual

3 September 2024

Primera Bravo 4202 XRP Manual

1 September 2024

Primera AP-Code Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AMX NMX-ENC-1100 Manual

14 September 2025

AMX UPC20+ Manual

14 September 2025

AMX DGX-I-DXL Manual

14 September 2025

AMX DGX-O-HDMI Manual

14 September 2025

AMX EXB-MP1 Manual

14 September 2025

AMX DGX-I-DXF-SMD Manual

14 September 2025

AMX AVB-WP-TX-MULTI-DXLINK Manual

14 September 2025

AMX NMX-ENC-N1133A Manual

14 September 2025

BSS Audio Soundweb 9088i Manual

14 September 2025

AMX NCITE-813 Manual

14 September 2025