Proaim CT-CMCL-01 Manual


Læs nedenfor 📖 manual på dansk for Proaim CT-CMCL-01 (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.1 stjerner i gennemsnit af 1.5 brugere

Side 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Camera Mount Clamps for Proaim Alpha
Stand (CT-CMCL-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
statutes or in wring by the Publisher.
What s In The Box
Camera Mount Clamps for Alpha Stand
2 x Allen Key
(3/16”, & 4mm)
A s s e m b ly Ma n u a l
2
Camera Mount Clamps Setup
Open the Clamp by loosening its ratchet knob.
as shown in the image.
Remove the bush from inside the Clamp.
Feature: Two mounng Clamps vercally aach
to your rod and provide a mount for a separately
available mounng rod and horseshoe camera
mount, allowing you to form a camera mounng
system.
Mount the Clamp on the Alpha stand
(Not Included).
NOTE: The Clamp can slide up/down and rotate
360° while securely clamped to the mast of your
stand, ensuring a solid aachment with its
locking knobs.
Aer mounng the Clamp, secure it by
ghtening the ratchet knob.
Repeat the same process with the second
Clamp.
NOTE: Locking knob secures the stand in place,
ensuring strength with a high level of safety.
Pull and loosen the second ratchet knob of the
Clamp and insert the rod in it. (Not Included)
Insert rod in the second clamp.
NOTE: The Clamps incorporate 1/4" 20 and 3/8"- -
16 mounng threads for accessory mounng.


Produkt Specifikationer

Mærke: Proaim
Kategori: Ikke kategoriseret
Model: CT-CMCL-01

Har du brug for hjælp?

Hvis du har brug for hjælp til Proaim CT-CMCL-01 stil et spørgsmål nedenfor, og andre brugere vil svare dig