Proaim DL-CMPS-01 Manual


Læs gratis den danske manual til Proaim DL-CMPS-01 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Proaim DL-CMPS-01, eller vil du spørge andre brugere om produktet?

Side 1/5
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Top Plate
Dolly Base Leg
Rods
Compass 360° Photo Booth Rotang Camera
Plaorm (DL- - CMPS 01)
4 (Size: 6x10mm Allen Buon)
5 (Size: 6x15mm Pan Phillips)
4mm Allen key
Ball Head
2
Compass 360° Camera Plaorm Setup
Same as above, insert the second rod into the
other side of 360° rod adapter of dolly base
leg.
Then properly insert all the Pan Phillips bolts
into the top plate and ghten them with the
help of a screwdriver.
Tighten all the allen bolts properly with the
help of the Allen key.
Insert the allen bolts to secure both the rods
with the dolly base leg.
Insert the rod in 360° rod adapter of the Dolly
Base Leg.
Place the top plate on 360° rod adapter, as
shown in the image.


Produkt Specifikationer

Mærke: Proaim
Kategori: Ikke kategoriseret
Model: DL-CMPS-01

Har du brug for hjælp?

Hvis du har brug for hjælp til Proaim DL-CMPS-01 stil et spørgsmål nedenfor, og andre brugere vil svare dig