Profoto Acute2 Manual


Læs gratis den danske manual til Profoto Acute2 (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Profoto Acute2, eller vil du spørge andre brugere om produktet?

Side 1/28
Acute2 manual Profoto, Stockholm, Sweden.
Warning
Profoto generators and lamp heads are parts of a complete
professional lighting system. Please read the instruction
manual carefully before use. Flash tubes and modelling
lamps emit considerable heat and may cause injury if not
handled properly.
Note, always unplug the lamp cable from the generator
before changing the modelling lamp or flash tube.
Under no circumstances are generators or heads to be
opened.High voltage is inside the equipment.
Do not touch hot metal parts.
Do not obstruct ventilation
Do not connect flash heads with the protective cap in place
When using the flash, do not place filters, diffusing mater-
ials, or any other obstructions directly onto the glass cover,
flash tube or modelling lamp.
Never position the light extremely close to people.
When mounting umbrellas, do not touch the flash tube or
modelling lamp with the metal shaft risk of high voltage.
Never connect accessories of other brands without consult-
ing an authorised service station.
Service only to be performed by an authorised repair station!
Always use a grounded mains outlet.
Note! Under no circumstances is any part of the equipment
to be opened! The equipment is not user-serviceable and
there is dangerous high voltage inside!


Produkt Specifikationer

Mærke: Profoto
Kategori: Ikke kategoriseret
Model: Acute2

Har du brug for hjælp?

Hvis du har brug for hjælp til Profoto Acute2 stil et spørgsmål nedenfor, og andre brugere vil svare dig