Promethean ActivPanel AP4-70E Manual

Promethean Skrivebord ActivPanel AP4-70E

Læs gratis den danske manual til Promethean ActivPanel AP4-70E (10 sider) i kategorien Skrivebord. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Promethean ActivPanel AP4-70E, eller vil du spørge andre brugere om produktet?

Side 1/10
Installation Guide
TP-2018-IG-V01
powered by
Installation
2 - ActivPanel Installation Guide
1 To open the ActivPanel carton, you will need to remove the plastic locks by squeezing the tabs and
pulling outward.
2 Lift the cover off the ActivPanel carton.
3 Assess the room or wall where the ActivPanel will be installed.
Check for pipes, electrical, etc.
Determine what wall anchors are necessary
Locate mounting studs
4 Reference the ActivPanel Installation Guide for measurements. Mark the measurements on the wall
and drill the holes.
5 Remove the ActivPanel wall bracket from ActivPanel, rotate it 180 degrees, and attach to the wall.
The at side goes against the wall.
6 Remove the vertical wall mounting bars from the ActivPanel.
7 Flip the vertical ActivPanel mounting bars over and reinstall them.


Produkt Specifikationer

Mærke: Promethean
Kategori: Skrivebord
Model: ActivPanel AP4-70E

Har du brug for hjælp?

Hvis du har brug for hjælp til Promethean ActivPanel AP4-70E stil et spørgsmål nedenfor, og andre brugere vil svare dig