Pulsar SF116 Manual

Pulsar Ikke kategoriseret SF116

Læs gratis den danske manual til Pulsar SF116 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Pulsar SF116, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

SF 116

v1.2

SF116 16-port switch for 16 IP cameras

Edition 4 from 29.01.2019 :

Supercedes the edition 3 from : 06.06.2018

Features:

 Switch 16 ports

16 10/100 PoE ports Mb/s (data transfer

and power supply)

2 ports G1/TP, G2/TP ports) (UpLink) 10/100/1000 Mb/s (

2 ports G1/SFP, G2/SFP ports) 10/100/1000Mb/s SFP (

(UpLink)

 W for each PoE port, supports devices complaint with 30

the IEEE802.3af/at standard (PoE+)

 Supports auto-learning and auto-aging of MAC addresses

(16K size)

 LED indication

 Additional assembly elements

 warranty 2 year from the production date –

Example of use.

1. Technical description.

1.1. General description.

SF is a -ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard 116 16 .

Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 ports of the switch The G1/TP –8 .

and G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots

(marked as G1/SFP and G2/SFP), the use of ber optic module (GBIC) allows ber optic transmission.The operating status of

the device (described in the table below) is displayed on the LED display on the front panel.

The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a

separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access

point or rou . ter

1.2. Block diagram.

Fig. 1. Block diagram.

1.3. Description of components and connectors.

Table 1 see Fig , 3 and 4) . ( . 2

Element no.

(Fig. 2)

Description

[1]

LED indication

[2]

16 x PoE port (1 ) ÷16

[3]

2 x UPLINK ports (G1/TP, P) G2/T

[4]

2 x UPLINK ports (G1/SFP, G2/SFP)

[5]

Power Socket of the 230 V

[6]

Additional mounting elements

Fig. 2. The front power of the switch.

Fig. 3. Rear panel of the switch.

Produkt Specifikationer

Mærke:	Pulsar
Kategori:	Ikke kategoriseret
Model:	SF116
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	442 mm
Dybde:	224 mm
Højde:	44 mm
Vægt:	2700 g
Produktfarve:	Sort
Pakkevægt:	3100 g
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	20 - 90 %
Driftstemperatur (T-T):	-10 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Netværksstandarder:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Link, Power, Status
Indgangsstrøm:	3 A
Strøm over Ethernet (PoE):	Ja
Switch-type:	Administreret
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	16
Basis omskiftning RJ-45 Ethernet porttype:	Fast Ethernet (10/100)
MAC adresselabel:	- entries
Switch kapacitet:	14.8 Gbit/sek.
Stativ-montering:	Ja
Antal SFP modulslots:	2
Gigabit Ethernet (kobber) porte, antal:	2
Power over Ethernet (PoE) porte, antal:	16
Strømforsyning inkluderet:	Ingen
Rack monteringskit:	Ja
Power over Ethernet (PoE) spænding:	52 V