Pulse ShowerSpas 1022 Manual

Pulse ShowerSpas Brusehoved 1022

Læs gratis den danske manual til Pulse ShowerSpas 1022 (4 sider) i kategorien Brusehoved. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Pulse ShowerSpas 1022, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Manufacturer’s Limited Warranty

PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in

workmanship and/or materials for a period of three years from the date of purchase.

This warranty extends to the original purchaser only and is non-transferable.

This warranty does not cover, and PULSE Showerspas will not pay for conditions,

malfunctions or damages resulting from (1) normal wear and tear, improper

installation, whether performed by a contractor, service company or the consumer,

improper maintenance, misuse, abuse, negligence, accident or alteration; (2) the use

of abrasive and/or caustic cleaning agents or “no-rinse” cleaning products or the use

of the product in any manner contrary to the product instruction; or (3) conditions in the

home such as excessive water pressure or corrosion.

Should any ShowerSpa be determined by PULSE Showerspas, Inc. to be defective

in normal residential use, at the option of PULSE Showerspas, Inc., such product

shall either be replaced or repaired and returned to the customer free of defects. The

consumer shall give notice of any defects to PULSE Showerspas, Inc. within thirty

days of discovery of such defect.

Proof of purchase (original sales receipt) must be provided to PULSE Shower Spas,

Inc. with all warranty claims. PULSE Shower Spas, Inc. is not responsible for labor

charges, removal charges, installation or other consequential costs. In no event shall

the liability of PULSE Showerspas, Inc. exceed the purchase price of the ShowerSpa.

Some states/provinces do not allow limitations of how long an implied warranty lasts or

the exclusion or limitation of such damages, so these limitations and exclusions may

not apply to you. This warranty gives the consumer specic legal rights. You may also

have other rights that vary from state/province to state/province.

Follow manufacturers recommended installation. Use caution with children under ten

years of age. Do not use ShowerSpa as a support device. Do not use harsh chemicals

or abrasives when cleaning. Turn water supply off when servicing ShowerSpa.

PULSE Showerspas, Inc. 49 Hangar Way Suite A Watsonville, CA 95076 888.785.7320 w w w

email:info@pulseshowerspas.com website: www.pulseshowerspas.com w

Leilani ShowerSpa

Installation Instructions

Model #1022

SHOWERSPA ASSEMBLY

After unpacking your ShowerSpa, some assembly is required prior to installation.

Slide Bar assembly: Refer to exploded line drawing and actual photo for reference.

1. With slide bar (part#3) in hand, position bracket (part #5) with screw hole pointing

left. Push cap (part #6) into slide bar until securely in place.

2. Insert bracket (part #5) into top slot of slide bar making sure top and bottom bracket

face the same direction and secure the top slide bar cap into place.

3. Align the assembled slide bar with pre-drilled holes located on right side of unit and

secure with provided machine screws and washers.

After the unit is mounted to the wall:

1. Insert washer (part #14) into hexagon shaped end of hand shower hose (part #10)

and attach to threaded outlet on bottom of ShowerSpa. (do not over-tighten.)

2. Insert washer (part #14) into tapered end of hand shower hose and attach to hand

shower (part #7). Insert hand shower into holder on slide bar.

Note: To adjust angle of hand shower gently rotate toward you or toward the wall. For

vertical adjustment simply depress the button and slide holder up or down.

3. Insert black washer (part #13) in Shower head and screw shower head onto the

adjustable shower arm. Note : To re-position shower arm loosen wing nuts and

move to desired position then re-tighten wing nuts.

Leilani Model # 1022

PLEASE READ THE FOLLOWING INSTRUCTIONS

COMPLETELY BEFORE BEGINNING!

Our goal is to ensure your installation goes smoothly and safely. Please read these safety

instructions carefully and follow recommendations for plumbing and mounting. If, after reading

instruction manual, you determine you do not have the necessary skills and/or tools, we

then recommend a licensed plumbing contractor complete the installation.

If you encounter any problems during installation call Technical Support toll

free at 888-785-7320 before returning item to store.

You will need the following tools:

Level Tape Measure

Soft pencil or felt pen to mark tile Drill (Preferably cordless)

A Reciprocating Saw w/metal cutting blade (Sawzall®) Channel Locks or adjustable wrench

¼ Masonry Drill Bit"

3. Remove handle(s) and trim cover(s) of your existing valve exposing valve body in wall.

4. Locate hot and cold supply lines entering valve. Using a reciprocating saw with sharp metal saw

blade, cut existing valve out, preserving threads of the supply lines entering valve. ( : you Note

should also cut the riser within wall supplying existing shower head.) Carefully twist and remove

valve.

5. Unscrew old shower head from arm and then unscrew arm.

6. It is recommended to extend water supply lines outside wall cavity parallel to nished wall

surface. Attach a male threaded tting to each supply line, maintaining ¼"- ½" space between

male threaded ttings and nished wall. The open end of male tting should point down³.

7. Make certain location (height/width) of stub-outs and connecting to them does interfere with not

desired mounting height of ShowerSpa.

8. Mark location of holes for mounting bracket making sure bracket is level. For a person 5'8" – 6'2"

tall, we recommend 54½" from nished oor height�. Before drilling holes for bracket, make certain

ShowerSpa will rest at against nished wall surface at desired mounting height with supply lines

connected.

9. Drill ¼" holes through wall surface using a masonry bit. Drill slowly through wall surface to avoid

cracking and chipping. Insert anchors and securely screw bracket to wall. Before connecting hot

and cold supply lines, mount ShowerSpa on wall, checking height, and making sure ShowerSpa

feels secure.

10. Connect hot and cold water supply lines to male threaded pipe, do not over-tighten. Before you

mount ShowerSpa, check ttings to make sure they are secure. Turn on water and check for

leaks. When ttings are leak-free mount ShowerSpa on wall.

11. : Seal around body of ShowerSpa with a bead of silicone. Optional DO NOT SEAL BOTTOM.

³ Additional ttings may be necessary depending on your specic situation.

� This height can vary depending on several factors (i.e. location of supply lines, old valve access

area, personal preference, etc.)

CARE AND MAINTENANCE

Always blot dry any water from the surface of your ShowerSpa. To help protect your

ShowerSpa from hard water stains and mineral deposits, use an auto spray wax periodically

and wipe down your ShowerSpa after each use. Allowing water to evaporate on the surface

can lead to a build up of mineral deposits. Cleaning with a damp, nonabrasive sponge and

drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.

REMEMBER:

Never use abrasives or harsh cleaners!!! Soap and water does

the trick! To keep your ShowerSpa in pristine condition, dry

after each use.

Produkt Specifikationer

Mærke:	Pulse ShowerSpas
Kategori:	Brusehoved
Model:	1022

Har du brug for hjælp?

Hvis du har brug for hjælp til Pulse ShowerSpas 1022 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Brusehoved Pulse ShowerSpas Manualer

Pulse ShowerSpas 1034 Manual

22 August 2024

Pulse ShowerSpas 1033 Manual

22 August 2024

Pulse ShowerSpas 1035 Manual

22 August 2024

Pulse ShowerSpas 1013-GL Manual

22 August 2024

Pulse ShowerSpas 1022 Manual

22 August 2024

Pulse ShowerSpas 1017 Manual

22 August 2024

Pulse ShowerSpas 1030 Manual

22 August 2024

Brusehoved Manualer

Nyeste Brusehoved Manualer

Hansgrohe Isiflex 28274330 Manual

9 August 2025

Hansgrohe Axor 28128800 Manual

9 August 2025

Ikea VALLAMOSSE 703.496.62 Manual

18 Juli 2025

Ikea BROGRUND 603.425.57 Manual

18 Juli 2025

Ikea VOXNAN 203.426.15 Manual

18 Juli 2025

Hansgrohe Rainfinity 100 1jet EcoSmart Manual

7 Juli 2025

Hansgrohe Raindance Select S 150 3jet Manual

7 Juli 2025

Alfi RAIN10SW Manual

6 Juli 2025

Miomare IAN 280070 Manual

5 Juli 2025

Miomare IAN 296092 Manual

5 Juli 2025