Pyle PLBX10A Manual

Pyle Subwoofer PLBX10A

Læs gratis den danske manual til Pyle PLBX10A (5 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Pyle PLBX10A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

PLBX10A

10” 900 Watts Low-Profile Active Amplified

Car Audio Subwoofer System

Suitable for Under-seat Installations

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.PyleUSA.com

2www.PyleUSA.com 3

Introduction

With the , we are introducing a low-prole amplied subwoofer. Low enough to PLBX10A

easily t below the seat of your car. This system oers you a quick and easy way to add a

high-powered subwoofer system to your audio system.

The integrated amplier in the features low pass crossovers, and a control forPLBX10A

adjusting the input sensitivity from 0.12V to 3.5V.

Both high level (speaker level) and low level (RCA type) inputs are present, making this a

universal solution for use with any head unit or other input source.

For further exibility in the use of a subwoofer, a variable bass boost control has been

included. You can control the subwoofer level with the remote level control module.

Mounting the Subwoofer

1. Find a suitable location in the vehicle in which to mount the amplier.

A typical location is shown below:

2. Make sure there is sucient air circulation around the intended mounting location.

3. Mark the location for mounting hole screws by positioning the cabinet where you wish to

install it. Make a small mark to identify the position and remove the unit. Thoroughly clean

the area you plan to attach the subwoofer, using a vacuum cleaner and press down on it

securely.

Control Panel and Features

1. POWER ON LED INDICATOR

2. PROTECT LED INDICATOR

3. PHASE SHIFT: Use this switch to help compensate for time alignment problems in the

system. Such problems usually result from having the subwoofer at a dierent distance

from the listener than the other speakers in the system.

4. LOW PASS FILTER: This control permits you dene the ferquency range you want the

subwoofer amplier to receive. The subwoofer will reproduce all sound BELOW the

frequency you set. If the rest of your system is weak on the mids, you may wish to set this

control relatively high. If the midrange is well covered by the rest of your system, you will

probably want the subwoofer to only receive lower frequency signal.

5. BASS BOOST: The bass boost feature will increase the sound level the bass frequencies.

6. INPUT GAIN CONTROL: After you have installed your system, turn this control to minimum.

Turn the head unit on (and the subwoofer will turn on via the remote connection or high

level input DC OFFSET turn on). Turn the head unit volume to about 2/3 full level and turn

the remote level control to maximum. Slowly turn up the subwoofer input gain control

until you hear a small amount of distortion. Then reduce the unit level or remote level

until the distortion is completely gone. Leave the control at this setting.

7. REMOTE LEVEL CONTROL PORT: Attach the included remote level control to cotrol the

volume level of the subwoofer independently.

8. HIGH LEVEL (speaker level) INPUTS: If your head unit does not have RCA outputs, you

can use the speaker outputs for the audio source for the PLBX10A. Use the supplied cable

and connect the outputs properly as shown in the connection diagram in this manual.

9. LOW LEVEL RCA INPUTS: Low level inputs are the recommended way to introduce the

audio signal to the subwoofer if RCA outputs are present on your head unit or other

signal source (such as a sound processor).

10. FUSE: The fuse is rated at 25A. Do not use a fuse with a dierent value and NEVER replace

the fuse with a wire or coin.

11. POWER TERMINALS

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Subwoofer
Model:	PLBX10A

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLBX10A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Subwoofer Pyle Manualer

Pyle PLMRBS10 Manual

6 Juni 2025

Pyle PDMR5 Manual

25 Januar 2025

Pyle PW18SUBA Manual

3 Januar 2025

Pyle PLMRK47BK Manual

10 September 2024

7 September 2024

2 September 2024

30 August 2024

30 August 2024

30 August 2024

12 August 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

RCF SUB 9019-AS Manual

16 Juni 2025

Induction Dynamics SW4 Manual

15 Juni 2025

Pure Acoustics Sub AS10 Manual

15 Juni 2025

RCF SUB 9029-AS Manual

15 Juni 2025

RCF SUB 9016-AS Manual

15 Juni 2025

Planet Audio P8AW Manual

15 Juni 2025

Planet Audio P10AW Manual

15 Juni 2025

Induction Dynamics SW2 Manual

10 Juni 2025

Induction Dynamics SW5.W Manual

9 Juni 2025

Diamond Audio DMD122SH Manual

9 Juni 2025