Pyle PRJTPS37 Manual

Pyle Kamerastativ PRJTPS37

Læs gratis den danske manual til Pyle PRJTPS37 (2 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Pyle PRJTPS37, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Tripod Stand

User Manual

PRJTPS37

User Manual

Step One: Aer removing the tripod from the packaging, unlock the middle wrench in order to

separate the legs of the tripod (this will extend the tripod). Tighten the wrench when it is fully

extended.

Step Two: Following the same method as in step one loosen the wrenches on each leg of the ,

tripod. Extend the legs outward as far as they can go (without stressing the tripod) and then

ghten the wrenches again.

Step Three: Put the tripod on the ground and test the weight by pu g some pressure on the in

top. None of the tripod feet should move or be loose.

Step Four: Slowly tighten Screw A“ ”

Step Five: Set the plate onto the tripod stand and x it to the projector. Raise the plate unl it is

at the desired height and then ghten Screw B“ ”. Make sure everything is completely secure

before placing the projector on to the tripod.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Kamerastativ
Model:	PRJTPS37
Vægt:	3329.3 g
Dimensioner (BxDxH):	739.14 x 739.14 x 1498.6 mm
Materiale:	Aluminium
Formål:	Data projektører
Antal ben:	3 ben
Højde (min.):	520.7 mm
Højde (maks.):	1498.6 mm
Maksimal vægtkapacitet:	15 kg
Drejevinkel:	360 °
Fodaftryk diameter (maks.):	25 mm