www.PyleUSA.com2
I. FEATURES
1. Ultra-large magnetic circuit high-sensitivity speaker with high penetrating power, low-frequency shock and
perfect medium-/high-frequency representation.
2. The latest decoding chips supporting stably playback of MP3 in up to 32GB U disk/SD card.
3. FM radio reception-high-quality digital radio with automatic channel search and storage of up to 60 channels.
4. 3. 5mm AUX audio input for each connection to a wide range of sound sources.
5. Built-in high-capacity battery for consecutive playback of up to 2 hours.
6. Connect the microphone, adjustable reverberation, voice and Karaoke function to present outstanding
performance.
7. Battery with built-in recharging protection to present a long and stable service life.
8. Built-in low battery and full recharging indication. Human-oriented use.
9. With belt/handle design for best choice of mobile speaker.
10. Outputs to earphone or external sound sources.
11. Record your favorite FM radio station or other AUX sound source to enjoy the music wherever you are.
12. Microphone input recording to act as your personal business assistant.
13. With Wireless BT function.
II. RECORDING
Recording via External Microphone:
Connect a storage device (USB/SD card) and short press RECORD key to start recording for a time depending on
the storage capacity. During recording, turn the “-ECHO+” knob to the minimum. It is best that the microphone
should have a proper distance away from the speaker to prevent any feedback.
NOTE: This product starts recording from the time as displayed on the LED screen.
III. WIRELESS BT PAIRING OPERATION
1. switch the power to ON, press the key “ ” to enter the Wireless BT mode, the display screen will ON/OFF: MODE
show “ ” indicating Wireless BT mode is active.BLUE
2. Make sure the Wireless BT function of the Mobile device is active and begin searching. Connect to mobile
device when shows. Mobile device connections do not need password, however if prompted, “Pyle Audio”
input to go on pairing. After a successful pairing, the speaker will send out a voice prompt indicating it “0000”
has successfully been paired with the mobile device.
3. Play the music from your mobile device directly and enjoy.
