QSC Axon DTH1620 Manual

QSC Ikke kategoriseret Axon DTH1620

Læs gratis den danske manual til QSC Axon DTH1620 (19 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5 anmeldelser. Har du et spørgsmål om QSC Axon DTH1620, eller vil du spørge andre brugere om produktet?

Side 1/19
TD-001622-01-A
*TD-001622-01*
Axon DTH1620
Themed Attraction
Amplifier
User Manual
Model:
Model:
Model:
Model: DTH1620
DTH1620
DTH1620
DTH1620Model: DTH1620
®
ii
TD-001622-01-A
EXPLANATION OF SYMBOLS
The term indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily “WARNING!”
injury or death.
The term indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, “CAUTION!”
it may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term is used to indicate additional useful information.“NOTE”
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated
«dangerous» voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
Elevated Operating Ambient Temperature – If installed in a closed or multi-unit rack assembly, the ambient operating
temperature of the rack environment may be greater than room ambient. Consideration should be given to ensure that the
maximum operating temperature range -10°C to 50°C (14°F to 122°F ) is not exceeded. Reduced Air Flow – Installation
of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not
compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing
connection.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from theapparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation.
16. Adhere to all applicable, local codes.
17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.
19. Do not unplug the unit by pulling on the cord, use the plug.
20. Do not submerge the apparatus in water or liquids.
21. Keep ventilation opening free of dust or other matter.


Produkt Specifikationer

Mærke: QSC
Kategori: Ikke kategoriseret
Model: Axon DTH1620

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC Axon DTH1620 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret QSC Manualer

QSC

QSC Axon D2i Manual

16 Juni 2025
QSC

QSC unHX2D Manual

10 Juni 2025
QSC

QSC TSC-8 Manual

29 Januar 2025
QSC

QSC unD4I-L Manual

29 Januar 2025
QSC

QSC E110 YM Manual

13 Januar 2025
QSC

QSC E12 YM Manual

13 Januar 2025
QSC

QSC CX-Qn 8K4 Manual

2 Oktober 2024
QSC

QSC DPA-4K4Qn Manual

29 September 2024
QSC

QSC QIO-ML4i Manual

27 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer