QSC Core Nano Manual

QSC Ikke kategoriseret Core Nano

Læs gratis den danske manual til QSC Core Nano (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om QSC Core Nano, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
TD-001615-00-A
*TD-001543-01*
™
Hardware User Manual
CORE NANO - NETWORK I/O PROCESSOR
CORE 8 FLEX - USB/FLEX CHANNELS
2
TD-001615-00-A
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol within an equilateral triangle is to alert the user to the presence of un-insulated
"dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the
rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating temperature
range 0°C to 50°C (32°F to 122°F) is not exceeded. Reduced Air Flow – Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8. Clean only with a dry cloth.
9. Do not block any ventilation opening. Installation next to another unit within a rack should allow sufficient air flow required for safe operation.
10. Keep the side ventilation openings free of dust or other matter.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protecting earthing connection.
13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
15. Do not unplug the unit by pulling on the cord, use the plug.
16. Only use attachments/accessories specified by the manufacturer.
17. Unplug this apparatus during lightning storms or when unused for long periods of time.
18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
19. The appliance coupler or the AC Mains plug is the AC mains disconnect device and shall remain readily accessible after installation.
20. Adhere to all applicable local codes.
21. Consult a licensed, professional engineer when in doubt or questions arise regarding a physical equipment installation.

Produkt Specifikationer

Mærke: QSC
Kategori: Ikke kategoriseret
Model: Core Nano

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC Core Nano stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret QSC Manualer

QSC

QSC Axon D2FLEXio Manual

17 Juli 2025
QSC

QSC DCM-3 Manual

17 Juli 2025
QSC

QSC DCM-1 Manual

17 Juli 2025
QSC

QSC unDNEMO-BT Manual

17 Juli 2025
QSC

QSC QIO-AES8x8 Manual

7 Juli 2025
QSC

QSC DCM 30 Manual

7 Juli 2025
QSC

QSC Q-SYS I/O-USB Bridge Manual

6 Juli 2025
QSC

QSC DCM 10D Manual

6 Juli 2025
QSC

QSC Synapse D32i Manual

20 Juni 2025
QSC

QSC Axon D2i Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Globe

Globe GVP20A Manual

3 September 2025
Deye

Deye SUN-7.6K-SG05LP1-EU-AM2-P Manual

3 September 2025
Kool-It

Kool-It Signature KCB-83-4 Manual

3 September 2025
SRS

SRS SR400 Manual

3 September 2025
Turbo Air

Turbo Air M3H24-1 Manual

3 September 2025
Biltema

Biltema 84-187 Manual

3 September 2025
Steinel

Steinel UI2 KNX Manual

3 September 2025
SRS

SRS DG645 Manual

3 September 2025
Scotsman

Scotsman NH1322-A Manual

3 September 2025
Stamos

Stamos S-PLASMA 85CNC Manual

3 September 2025