QSC DCP 300 Manual

QSC Ikke kategoriseret DCP 300

Læs gratis den danske manual til QSC DCP 300 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15 anmeldelser. Har du et spørgsmål om QSC DCP 300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Digital Cinema Hardware User Manual

DCP – Digital Cinema Processor

DCP Series

*TD-000285-00*

TD-000285-00 C

IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS

WARNING!

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated

“dangerous” voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock

to humans.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in this manual.

SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.

Improper use can result in potential electrical shock or ﬁre hazards. In order not to defeat the safeguards, observe the following

instructions for its installation, use and servicing.

Caution: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer servicing to qualiﬁed

service personnel.

Warning: To prevent ﬁre or electric shock, do not expose this equipment to rain or moisture.

1. Maximum operating ambient temperature is 50°C (122°F).

2. Never restrict airﬂow through the device vents. Please insure that the side panel vents are unobstructed.

3. When installing equipment into a rack, distribute the units evenly. Otherwise, hazardous conditions could be created by an uneven distri-

bution of weight.

4. Connect the unit only to a properly rated supply circuit. The DCP is suitable for connection to 100-240VAC, 50-60Hz with no special consid-

erations other than the appropriate IEC power cord.

5. Reliable earthing (grounding) of rack-mounted equipment should be maintained.

LITHIUM BATTERY WARNING

THE DCP EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL KNOWN TO THE STATE

OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM BATTERY CONTAINED IN THIS

EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT

TO RECHARGE THE NON-RECHARGEABLE LITHIUM BATTERY.

Warranty (USA only; other countries, see your dealer or distributor)

Disclaimer

QSC Audio Products, LLC (“QSC”) is not liable for any damage to amplifiers, loudspeakers, or other equipment that is caused by negligence or improper

installation and/or use of this signal processing product. While QSC has endeavored to develop and produce the most dependable and robust ‘network’

audio product for your use, due to the myriad of network situations and equipment that may be encountered in its implementation, QSC cannot be held

responsible for network conflicts and associated consequences that may result. For this reason, QSC strongly recommends that the network used for

implementation of the DCP product(s) be completely separate from all other networks, data or otherwise. As such, should you elect to integrate the DCP

product(s) with an existing network system, all risks attendant to such integration of the DCP product(s) with an existing network or network systems are

assumed by you. While QSC strives to provide the highest quality technical solutions for networked audio products, in no event will QSC or its suppliers

be held liable for any damage, consequential, incidental or otherwise, including any claims for lost profits and/or savings resulting from

any attempted integration of the DCP product(s) with an existing network or network system. No agent, employee or representative of QSC has any

authority to alter or modify in any manner, the disclosures and recommendations set forth herein.

QSC Audio Products 3-Year Limited Warranty

QSC Audio Products, LLC (“QSC”) guarantees the DCP 100, 200, and 300 products to be free from defective materials and/or workmanship for a period

of three (3) years from the date of sale and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs

under normal installation and use – provided the unit is returned to our factory or one of our authorized service stations via prepaid transportation with

a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination of the returned product must indicate, in our judgment, a

manufacturing defect. This warranty does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or

where the date code has been removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you specific

legal rights. This limited warranty is freely transferable during the term of the warranty period.