QSC I/O-8 Flex Manual

QSC Ikke kategoriseret I/O-8 Flex

Læs gratis den danske manual til QSC I/O-8 Flex (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om QSC I/O-8 Flex, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
™
Hardware User Guide
I/O-8 Flex – Channel Expander
TD-000520-00-A
*TD-000520-00*
2
TD-000520-00-A
EN
EXPLANATION OF TERMS AND SYMBOLS
The term “ ” indicates instructions regarding personal safety. If the instructions are not followed the result may WARNING!
be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are CAUTION!
not followed, it may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of
theprocedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
• - If installed in a closed or multi-unit rack assembly, the ambient operating Elevated Operating Ambient
temperature of the rack environment may be greater than room ambient. Consideration should be given to
ensure that the maximum operating temperature range (0°C to 50°C (32°F to 122°F ) is not exceeded.
• – Installation of the equipment in a rack should be such that the amount of air flow Reduced Air Flow
required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8. Clean only with a dry cloth.
9. Install in accordance with the manufacturer's instructions.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
11. Do not unplug the unit by pulling on the cord, use the plug.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Adhere to all applicable, local codes.
16. Consult a licensed, professional engineer when doubt or questions arise regarding a physical equipment installation.

Produkt Specifikationer

Mærke: QSC
Kategori: Ikke kategoriseret
Model: I/O-8 Flex

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC I/O-8 Flex stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret QSC Manualer

QSC

QSC Axon D2FLEXio Manual

17 Juli 2025
QSC

QSC DCM-3 Manual

17 Juli 2025
QSC

QSC DCM-1 Manual

17 Juli 2025
QSC

QSC unDNEMO-BT Manual

17 Juli 2025
QSC

QSC QIO-AES8x8 Manual

7 Juli 2025
QSC

QSC DCM 30 Manual

7 Juli 2025
QSC

QSC Q-SYS I/O-USB Bridge Manual

6 Juli 2025
QSC

QSC DCM 10D Manual

6 Juli 2025
QSC

QSC Synapse D32i Manual

20 Juni 2025
QSC

QSC Axon D2i Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Globe

Globe GVP20A Manual

3 September 2025
Deye

Deye SUN-7.6K-SG05LP1-EU-AM2-P Manual

3 September 2025
Kool-It

Kool-It Signature KCB-83-4 Manual

3 September 2025
SRS

SRS SR400 Manual

3 September 2025
Turbo Air

Turbo Air M3H24-1 Manual

3 September 2025
Biltema

Biltema 84-187 Manual

3 September 2025
Steinel

Steinel UI2 KNX Manual

3 September 2025
SRS

SRS DG645 Manual

3 September 2025
Scotsman

Scotsman NH1322-A Manual

3 September 2025
Stamos

Stamos S-PLASMA 85CNC Manual

3 September 2025