QSC K8.2 Manual

QSC Højttaler K8.2

Læs gratis den danske manual til QSC K8.2 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om QSC K8.2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

K.2 Series

User Manual

K8.2 – 105° 2000 W active 8” (200 mm) 2-way loudspeaker system

K10.2 – 90° 2000 W active 10” (250 mm) 2-way loudspeaker system

K12.2 – 75° 2000 W active 12” (300 mm) 2-way loudspeaker system

TD-000523-01-F

*TD-000523-01*

TD-000523-01-F

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may

be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are

not followed, it may result in damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term “NOTE” is used to indicate additional useful information.

NOTE: The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence

of un-insulated “dangerous” voltage within the product’s enclosure that may be of sufﬁcient magnitude to

constitute a risk of electric shock to humans.

NOTE: The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of

important safety, and operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE. DO NOT USE THIS APPARATUS NEAR WATER.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from theapparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

TD-000523-01-F

14. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable

after installation.

15. Adhere to all applicable, local codes.

16. To prevent electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.

19. Do not unplug the unit by pulling on the cord, use the plug.

20. Do not submerge the apparatus in water or liquids.

21. Keep ventilation opening free of dust or other matter.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Maintenance and Repair

WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially

adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons

and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only

by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury,

harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

Life Cycle: 10 years, Storage Temperature range: -20C to +70C, Relative Humidity range: 5 - 85% RH

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

TD-000523-01-F

RoHS Statements

These products are in compliance with European Directive 2011/65/EU – Restriction of Hazardous Substances (RoHS).

These products are in compliance with “China RoHS” directives per GB/T26572. The following table is provided for

product use in China and its territories:

These products 这些产品

部件名称

(Part Name)

有害物质

(Hazardous Substances)

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(vi))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件

(PCB Assemblies)

X O O O O O

机壳装配件

(Chassis Assemblies)

X O O O O O

本表格依据 SJ/T 11364 的规定编制。(This table is prepared following the requirement of SJ/T 11364.)

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。

O: Indicates that the concentration of the substance in all homogeneous materials of the part is below the relevant threshold speciﬁed in GB/T

26572.

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。

X: Indicates that the concentration of the substance in at least one of all homogeneous materials of the part is above the relevant threshold speciﬁed in

GB/T 26572.

（目前由于技术或经济的原因暂时无法实现替代或减量化) (Replacement and reduction of content cannot be achieved currently because of the

technical or economic reason.)

Package Contents

K.2 Series

Loudspeaker

Locking

AC Power cord

White QSC Logo

QSC Limited

Warranty

TD-000453

K.2 Series

Quick Start Guide

TD-000452

Powered Loudspeaker

Safety Sheet

TD-000337

K.2 Series

Produkt Specifikationer

Mærke:	QSC
Kategori:	Højttaler
Model:	K8.2
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	280 mm
Dybde:	269 mm
Højde:	449 mm
Vægt:	12200 g
Produktfarve:	Sort
Pakkevægt:	14400 g
Udgangseffekt (RMS):	- W
Equalizer:	Ja
Skærm:	1.75" LCD
Husmateriale:	Acrylonitrilbutadienstyren
Anbefalet brug:	Universel
Frekvensområde:	55 - 20000 Hz
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Gulv
Certificering:	CE, WEEE, UL, China RoHS, RoHS II, FCC B
LED-indikatorer:	Ja
Strømkilde type:	Vekselstrøm
Antal drivere:	2
AC (strøm) indgang:	Ja
Forstærker:	Indbygget
Forstærker klasse:	D
AirPlay:	Ingen
Forstærker/modtager input grænsefladetype:	3.5 mm jack, XLR
Anbefalet forstærkereffekt (maks.):	1800 W
Anbefalet forstærkereffekt (min.):	225 W
Transducer materiale:	Titanium
Højttaler grænsefladetype:	XLR