QSC MP-M80 Manual

QSC Blandekonsol MP-M80

Læs gratis den danske manual til QSC MP-M80 (78 sider) i kategorien Blandekonsol. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om QSC MP-M80, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/78
TD-001578-01-C
*TD-001578-01*
Music & Paging Zone Mixer
User Manual
MP-M80 Firmware Version 1.2
MP-M40 Firmware Version 1.2
®
ii
TD-001578-01-C
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating
and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8. Clean only with a dry cloth.
9. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
10. Keep all ventilation openings free of dust or other matter.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.
13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
theapparatus.
15. Do not unplug the unit by pulling on the cord, use the plug.
16. Only use attachments/accessories specified by the manufacturer.
17. Unplug this apparatus during lightning storms or when unused for long periods of time.
18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
19. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily accessible after installation.
20. Adhere to all applicable, local codes.
21. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
22. Inspect the apparatus, including the power supply for signs of external wear and tear or signs of damage. All damage to the apparatus should
be immediately repaired by a QSC authorized service station or QSC International Distributor. Failure to perform necessary repairs could lead
to additional damage or to safety hazards. Failure to perform necessary repairs voids the limited warranty and QSC is not responsible for any
injury, harm or related damages arising from any failure to perform those repairs.
Maintenance and Repair
WARNING!:
Advance technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation
of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service
station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any
failure of the customer, owner or user of the apparatus to facilitate those repairs.

Produkt Specifikationer

Mærke: QSC
Kategori: Blandekonsol
Model: MP-M80

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC MP-M80 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Blandekonsol QSC Manualer

QSC

QSC TMR-1 Manual

9 August 2024
QSC

QSC MP-M80 Manual

29 Juli 2024
QSC

QSC TouchMix-16 Manual

28 Juli 2024
QSC

QSC TouchMix-8 Manual

27 Juli 2024

Blandekonsol Manualer

Nyeste Blandekonsol Manualer

Arendo

Arendo Power Mixer 303085 Manual

3 April 2025
Hobart

Hobart MG1532 Manual

27 Februar 2025
American Audio

American Audio Q-D6 Manual

15 Januar 2025
ADB

ADB ME1163 Manual

15 Januar 2025
Proline

Proline HB200P Manual

15 Januar 2025
König

König KN-DIGICON20 Manual

11 Januar 2025
Vonyx

Vonyx STM500BT Manual

11 Januar 2025
Rane

Rane Sixty-Four Manual

11 Januar 2025
Wharfedale

Wharfedale SL 1224 USB Manual

11 Januar 2025
Glemm

Glemm MXD 08 Manual

10 Januar 2025