QSC Q-SYS I/O-USB Bridge Manual

QSC Ikke kategoriseret Q-SYS I/O-USB Bridge

Læs gratis den danske manual til QSC Q-SYS I/O-USB Bridge (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om QSC Q-SYS I/O-USB Bridge, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

™

Hardware Quick Start Guide

Q-SYS™ I/O-USB Bridge

• Read these instructions

and keep a copy on

hand.

• Heed and follow

all warnings and

instructions.

• Install only in

accordance with

the manufacturer’s

instructions.

• Use only attachments

and accessories that

are speciﬁed by the

manufacturer.

• Refer all servicing

to qualiﬁed service

personnel.

• Adhere to all applicable

local codes.

• Use only a Class 2 LPS

power supply.

IMPORTANT SAFETY INSTRUCTIONS

TD-000543-01-B

*TD-000543-01*

Maintenance and Repair

WARNING: Advanced technology, e.g., the use of modern

materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of

subsequent damage to the apparatus, injuries to persons and/

or the creation of additional safety hazards, all maintenance or

repair work on the apparatus should be performed only by a QSC

authorized service station or an authorized QSC international

distributor. QSC is not responsible for any injury, harm or related

damages arising from any failure of the customer, owner or user

of the apparatus to facilitate those repairs.

TD-000543-01-B 2

FCC Statement

NOT: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RoHS Statement

The QSC Q-SYS I/O-USB Bridge is in compliance with European Directive

2011/65/EU – Restriction of Hazardous Substances (RoHS2).

The QSC Q-SYS I/O-USB Bridge is in compliance with “China RoHS”

directives.

Produkt Specifikationer

Mærke:	QSC
Kategori:	Ikke kategoriseret
Model:	Q-SYS I/O-USB Bridge

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC Q-SYS I/O-USB Bridge stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret QSC Manualer

QSC Q-SYS I/O-USB Bridge Manual

6 Juli 2025

QSC DCM 10D Manual

6 Juli 2025

QSC Synapse D32i Manual

20 Juni 2025

16 Juni 2025

10 Juni 2025

1 April 2025

29 Januar 2025

29 Januar 2025

13 Januar 2025

13 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AJA HELO Plus Manual

6 Juli 2025

Sommer ASB-6010A Manual

6 Juli 2025

Bartscher AGN1000-1/1 Manual

6 Juli 2025

Lorelli Scout Manual

6 Juli 2025

DeepCool CG530 4F Manual

6 Juli 2025

Intermatic FM1STUZ-24U Manual

6 Juli 2025

Supermicro X13DEG-D Manual

6 Juli 2025

Olight Odin Manual

6 Juli 2025

American DJ Hydro Beam X1 Manual

6 Juli 2025

Safco 7131 Manual

6 Juli 2025