QSC QIO-AES8x8 Manual

QSC Ikke kategoriseret QIO-AES8x8

Læs gratis den danske manual til QSC QIO-AES8x8 (26 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om QSC QIO-AES8x8, eller vil du spørge andre brugere om produktet?

Side 1/26
Hardware User Manual
QIO Series Audio I/O Expanders for Q-SYS:
QIO-ML4i, QIO-L4o, QIO-ML2x2, QIO-AES8x8, QIO-TEL2, QIO-FLEX4A
QIO Series Control I/O Expanders for Q-SYS:
QIO-GP8x8, QIO-S4, QIO-IR1x4, QIO-LVR4
TD-001667-01-F
*TD-001667-01*
2
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
The term “CAUTION” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in
equipment damage to equipment that may not be covered under the warranty.
The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.
The term “NOTE” indicates additional useful information.
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating temperature of
the rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating
temperature range (0°C to 50°C) is not exceeded. However, if installing a QIO-GP8x8 in a multi-unit rack assembly with
units on all sides, the maximum operating temperature should not exceed 40°C when devices are placed above or below.
Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
CAUTION: To reduce the risk of fire, use only 26 AWG or larger telecommunication line cord with the QIO-TEL2.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into theapparatus.
8. Clean only with a dry cloth.
9. Do not block any ventilation opening. Install in accordance with the manufacturer’sinstructions.
10. Keep all ventilation openings free of dust or other matter.
11 . Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. Do not unplug the unit by pulling on the cord, use the plug.
13. Only use attachments/accessories specified by the manufacturer.
14. Unplug this apparatus during lightning storms or when unused for long periods oftime.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. Adhere to all applicable, local codes.
17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.


Produkt Specifikationer

Mærke: QSC
Kategori: Ikke kategoriseret
Model: QIO-AES8x8

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC QIO-AES8x8 stil et spørgsmål nedenfor, og andre brugere vil svare dig