QSC QIO-S4 Manual

QSC Ikke kategoriseret QIO-S4

Læs gratis den danske manual til QSC QIO-S4 (13 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om QSC QIO-S4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/13
™
Hardware User Manual
Q-SYS™ QIO Endpoints
QIO-ML4i Network Audio I/O Expander for Q-SYS
QIO-L4o Network Audio I/O Expander for Q-SYS
QIO-ML2x2 Network Audio I/O Expander for Q-SYS
QIO-GP8x8 Network Control I/O Expander for Q-SYS
®
TD-001667-01-A
*TD-001667-01*
2
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in CAUTION
equipment damage to equipment that may not be covered under the warranty.
The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.
The term “ ” indicates additional useful information.NOTE
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
• Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating temperature
of the rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum
operating temperature range (0°C to 50°C (32°F to 122°F ) is not exceeded. However, if installing a GP8x8 in a multi-unit
rack assembly with units on all sides, the maximum operating temperature should not exceed 40°C when devices are placed
above or below.
• – Installation of the equipment in a rack should be such that the amount of air flow required for safe Reduced Air Flow
operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into theapparatus.
8. Clean only with a dry cloth.
9. Do not block any ventilation opening. Install in accordance with the manufacturer’sinstructions.
10. Keep all ventilation openings free of dust or other matter.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. Do not unplug the unit by pulling on the cord, use the plug.
13. Only use attachments/accessories specified by the manufacturer.
14. Unplug this apparatus during lightning storms or when unused for long periods oftime.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. Adhere to all applicable, local codes.
17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Produkt Specifikationer

Mærke: QSC
Kategori: Ikke kategoriseret
Model: QIO-S4

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC QIO-S4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret QSC Manualer

QSC

QSC Axon D2FLEXio Manual

17 Juli 2025
QSC

QSC DCM-3 Manual

17 Juli 2025
QSC

QSC DCM-1 Manual

17 Juli 2025
QSC

QSC unDNEMO-BT Manual

17 Juli 2025
QSC

QSC QIO-AES8x8 Manual

7 Juli 2025
QSC

QSC DCM 30 Manual

7 Juli 2025
QSC

QSC Q-SYS I/O-USB Bridge Manual

6 Juli 2025
QSC

QSC DCM 10D Manual

6 Juli 2025
QSC

QSC Synapse D32i Manual

20 Juni 2025
QSC

QSC Axon D2i Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Globe

Globe GVP20A Manual

3 September 2025
Deye

Deye SUN-7.6K-SG05LP1-EU-AM2-P Manual

3 September 2025
Kool-It

Kool-It Signature KCB-83-4 Manual

3 September 2025
SRS

SRS SR400 Manual

3 September 2025
Turbo Air

Turbo Air M3H24-1 Manual

3 September 2025
Biltema

Biltema 84-187 Manual

3 September 2025
Steinel

Steinel UI2 KNX Manual

3 September 2025
SRS

SRS DG645 Manual

3 September 2025
Scotsman

Scotsman NH1322-A Manual

3 September 2025
Stamos

Stamos S-PLASMA 85CNC Manual

3 September 2025