Qtx Effect 100.615UK Manual

Qtx Højttaler Effect 100.615UK

Læs gratis den danske manual til Qtx Effect 100.615UK (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Qtx Effect 100.615UK, eller vil du spørge andre brugere om produktet?

Side 1/4
100.615 User Manual UK
Effect: Portable Bluetooth Party Speaker
Item ref: 100.615UK
User Manual
Take the party with you wherever you go, with a portable Bluetooth speaker with colourful LED light show.
Perfect for karaoke kings and queens, simply connect the microphone to showcase your talents and record
sing-alongs with the voice record function. Play your tunes via Bluetooth from your smart device, use the
inbuilt media ports or even FM radio. This speaker is light enough to be carried by shoulder strap and features
an internal rechargeable battery with up to 3 hours power from a single charge.
Stylish and rugged design
Connect to your smart device via Bluetooth
Wired microphone included for karaoke and voice record functions
LED colour light effect in grille
Media player with inbuilt FM/USB/AUX and Microphone ports
Internal rechargeable battery with up to 3 hours playback
Ideal for karaoke, house parties, kids' rooms and more
Technical Specificat and Features ions
Speaker
6.5" Driver 10W RMS
Frequency range
70Hz- KHz 18
Impedance
4.0 Ohms
Bluetooth version
5.0+EDR
Bluetooth range
Up to 10m (in clear line of sight)
FM Frequency range
87.5MHz-108MHz
Battery type
3.7V 2200mA internal rechargeable Lithium Ion
Battery life
Up to 3 hours (max volume)
Charge time
3 Hours from flat
Input connections
Bluetooth, USB, AUX (3.5mm), micro USB (DC 5V/1A - charge only)
Dimensions
300 250 x 180 mm (W x H x D) x
Weight
1.65kg
Controls Diagram:
100.615 User Manual UK
Unit Controls and Features:
1. Volume co rolnt : Rotate to increase or lower the master volume.
2. Power/mode button ( ): Long press to power the unit on or off. Short press to switch between
modes (Bluetooth/AUX/FM/Record ).
3. Play/pause button ( ): Long press to turn the LED Light show on off. ort press in BT/or Sh USB
mode to play or pause the current track, in FM mode to perform a channel scan and in record mode to
playback a recording.
4. Next track/station button ( ): Short press to move t the next track in BT/USB mode, or next o
station in FM mode. Long press with the microphone inserted to increase the echo/reverb effect. Short
press in record mode to begin the recording session.
5. Previous track/station button ( ): Short press to mov to the previous track in BT/USB mode, or e
previous station in FM mode. Long press with the microphone inserted to decrease the echo/reverb effect.
Short press in record mode to end the recording session.
6. DC in 5V micro USB port: Use the charging cable sup ied and connect to a compatible USB power pl
source for charging or constant power.
7. USB port: Multimedia playback via a USB flash drive or other compatible USB device.
8. AUX in jack: Use to connect to audio output devices with a compatible 3.5mm lead (not sup ied). pl
9. Microphone jack: Connect the wired microphone sup ied for voice playback or record g.pl in
10. LED charging indicator: Glows red when the unit is connected to a compatible USB power source and in
charging mode. Goes out when fully charged.
11. Reset aperture: Press using a pin or sharp object to reset the unit when required.
Charging the battery:
Fully charge the Effect s internal battery before first use. Use the USB cable provided and only connect to a
suitable 5V USB power supply.
During charging, the indicator will glow red and go out when the unit is fully charged. LED
Note: If the Effect is used while connected to a USB power source, the indicator will always glow, even
when the unit is fully charged.
Bluetooth Mode:
Select Bluetooth mode by short p ssing the repeatedly until you hear the relevant re Power/mode button
voice prompt.
The Effect w automatically enter Bluetooth pairing mode and become discoverable from your smart ill
device.
Enter the Bluetooth device list on your smart device and search fo and select to pair. r “ ”QTX-Effect
Your device may ask you for a pairing confirmation or code, enter if prompt . When successful, “ ”0000 ed a
pairing tone can be heard.
Once paired, the Effect will automatically reconnect to your device when both are in Blue oth mode and to
within 10m of each other.
You can now also use the units Play/pause, Previous track/statio xt track/station n or Ne buttons
to control the music on your connected smart device.
USB mode:
The Eff t is fitted with a media player which can play compatible music files from the USB port on the ec
back of the unit.
Simply insert your USB dia and the unit will automatically enter USB mode and a voice prompt can be me
heard. Alternatively, you can select th USB mode by short pressing the e Power/mode button repeatedly
until you hear the relevant voice prompt.
You can now play o scroll through the tracks using the r Play/pause Previo track/station , us or Next
track/station buttons on the front of the unit.
The E ect also has a memory function which means it will contin from the last played track on the last ff ue
album played, on the last occasion it was inserted.


Produkt Specifikationer

Mærke: Qtx
Kategori: Højttaler
Model: Effect 100.615UK

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx Effect 100.615UK stil et spørgsmål nedenfor, og andre brugere vil svare dig