Quad Revela Stand Manual

Quad Højtalerbeslag Revela Stand

Læs gratis den danske manual til Quad Revela Stand (16 sider) i kategorien Højtalerbeslag. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Quad Revela Stand, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
User Manual
Loudspeaker Range
Revela Series
Scan the QR code using a smart-phone device,
for product warranty registration online.
2
IMPORTANT SAFETY INFORMATION
Before installing this product read all these instructions!
operating and maintenance instructions in the
literature accompanying this unit.
Read these instructions. Keep these instructions. Heed all
warnings. Follow all instructions.
Before making any connections, switch all the units in
your system o at the mains.ff
Set the volume control at minimum when you switch on
your system or change sources, and turn the level up
gradually.
Do not use your amplifier at full volume.
Ensure that s in the system areall loudspeaker correctly
wired.
Do not subject your loudspeakers to excessive cold, heat,
humidity or sunlight.
Loudspeakers should not be placed directly facing other
hi-fi units or share the same shelf or cabinet.
Do not place heavy objects on top of loudspeakers.
Some forbid the placing of objects on topmanufacturers
of TV TVtheir sets. Check your handbook before
installing the speaker directly on your TV set. Consult
your TV dealer if you are in any doubt.
Do not connect to the mains supply.speaker terminals
Do not dismantle the loudspeaker. There are no user
serviceable parts inside it and you will void the warranty
by doing so.
Refer all service personnel.servicing to qualified
Servicing the apparatus has beenis required when
damaged in any way, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
Caution: notChanges modificationsor expressly
approved by the manufacturer could void the user's
authority to operate this device.
Unpacking Your Loudspeaker
Revela loudspeakers come in different shapes and sizes.
If you are unpacking a floor-stander, please remember
that these units are heavy. We suggest that you have
someone to assist you.
Lift the loudspeaker carefully out of the packing. Do not
try and lift the loudspeaker using the protective bag.
Unpack the accessories carefully.
If there is any sign of damage or if the contents are
incomplete, report this to your dealer as soon as possible.
Retain the packing for future safe transport of the
product. If you dispose of the packing, do so with respect
to any recycling provisions in your area.
QUAD Revela 1 bookshelf: these loudspeakers should
ideally be stand mounted though they may be placed on
a rigid shelf separate from the rest the system.
QUAD Revela 2 floor-stander: these loudspeakers are
floor-standing and should be fitted with spikes for better
stability and performance.
Attaching the Spikes to Floor-standing Model
- Revela 2
·
·
·
·
·
·
Levelling the Floor-standing Model - Revela 2
·
·
·
·
Make sure you have plenty of unobstructed working space.
Place a soft cloth on the floor to protect the loudspeaker.
Invert the loudspeaker onto the cloth.
Thread a locknut onto each spike and loosely rub it up
the thread.
Thread the spikes into the spike inserts. Tighten them
with finger tight.
Invert the loudspeaker. Be careful not to damage the
floor with the spikes.
When the speaker is upright: You will probably find
that the speaker will wobble with one spike not
contacting the floor. Adjust this spike until all four
spikes are in contact to the floor.
With the aid of a spirit level move each spike in and out
until the loudspeaker is level and sitting squarely on all
four spikes without rocking.
Now tighten each locknut securely against the collar in
the plinth to secure the spike.
Screw in rubber feet are provided for use on wood or
stone floors etc. and should be attached in the same
manner as the spikes.
IMPORTANT
SAFETY INFORMATION
PREPARING THE
LOUDSPEAKERS
CONNECTING THE
LOUDSPEAKERS
WARRANTY
COVERAGE
SPECIFICATIONS INTRODUCTION

Produkt Specifikationer

Mærke: Quad
Kategori: Højtalerbeslag
Model: Revela Stand

Har du brug for hjælp?

Hvis du har brug for hjælp til Quad Revela Stand stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtalerbeslag Quad Manualer

Quad

Quad Revela Stand Manual

18 August 2025

Højtalerbeslag Manualer

Nyeste Højtalerbeslag Manualer

Triangle

Triangle S01 Manual

6 Oktober 2025
APart

APart MASK2CMT-W Manual

6 Oktober 2025
Triangle

Triangle S04 Manual

6 Oktober 2025
Triangle

Triangle S08C Manual

5 Oktober 2025
Triangle

Triangle S08 Manual

5 Oktober 2025
Triangle

Triangle S05 Manual

5 Oktober 2025
APart

APart MASK2CMT Manual

5 Oktober 2025
Insignia

Insignia NS-SPST2B Manual

29 September 2025
Sanus

Sanus WSWME11 Manual

28 September 2025
Sanus

Sanus VMCC1 Manual

27 September 2025