Radial Engineering BigShot SW2 Manual

Radial Engineering Ikke kategoriseret BigShot SW2

Læs gratis den danske manual til Radial Engineering BigShot SW2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Radial Engineering BigShot SW2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

www.radialeng.com

Radial Engineering Ltd.

1638 Kebet Way, Port Coquitlam BC V3C 5W9

Tel: 604-942-1001 Fax: 604-942-1010

email: info@radialeng.com

BigShot SW2

Owner’s Manual

True to the Music

Radial BigShot SW2 users guide v1.0 - Part #: R870 1165 00

Subject to change without notice

BigShot SW2 User Guide

Radial Engineering Ltd.

LIMITED THREE YEAR TRANSFERABLE WARRANTY

Radial Engineering Ltd. (“Radial”) warrants this product to be free from defects in

material and workmanship and will remedy any such defects free of charge according

to the terms of this warranty. Radial Engineering will repair or replace at its option any

defective component(s) of this product, excluding the ﬁnish, the footswitch (footswitch

is warranted for 90 days) and wear and tear from normal use, for a period of three

(3) years from the original date of purchase. In the event that a particular product

is no longer available, Radial Engineering reserves the right to replace the product

with a similar product of equal or greater value. To make a request or claim under

this limited warranty, the product must be returned prepaid in the original shipping

container (or equivalent) to Radial Engineering or to an authorized repair centre and

you must assume the risk of loss or damage. A copy of the original invoice showing

date of purchase and the dealer name must accompany any request for work to be

performed under this limited warranty. This limited warranty shall not apply if the product

has been damaged due to abuse, misuse, misapplication, accident or as a result of

service or modiﬁcation by any other than an authorized repair centre.

THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE

HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL

EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE

OF THREE YEARS.

RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING

FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY

DEPENDING ON WHERE YOU LIVE.

BigShot SW2 User GuideRadial Engineering Ltd.

REMOTE-1 - This ¼” jack out-

puts the switching signal when

switch R-1 is depressed.

9VDC - connection jack for

standard 9 volt power adaptors

(center tip negative).

REMOTE-2 - ¼” jack outputs

switching signals when R-2

switch is depressed.

LATCH/PULSE - Selects the

type of switching signal be-

tween latching contact type and

electronic pulse.

OPEN/CLOSED - Selects

between two switch states;

normally open, or normally

closed for compatibility with

different switching schemes.

R-1 - heavy-duty footswitch with

LED status indicator. Triggers

switching signal at REMOTE-1

output when depressed.

LINK - Three position switch

allows either footswitch to act

as a master and control both

outputs. This enables the SW2

to toggle two different devices

simultaneously by depressing a

single switch.

R-2 - heavy-duty footswitch with

LED status indicator. Triggers

switching signal at REMOTE-2

output when depressed.

FEATURES AND FUNCTIONS

321

6 8

BIGSHOT SW2 SPECIFICATIONS

Connections: ...................... 2 x ¼” phone outputs

Switching: ........................... Active relays with latching & pulse modes

Power requirement ............. 9 Volt DC, center negative

Current draw: ..................... 40mA max with both LEDs on

Size: ................................... 3” x 3” x 2”

True to the Music

INTRODUCTION

Congratulations on your purchase of the Radial Bigshot SW2 Slingshot remote

control. Radial products are easy to use and this short manual contains all

the information you need to start using your Bigshot SW2 right away. For

more information on the SW2 and other Radial products, visit our website,

www.radialeng.com.

OVERVIEW

The BigShot SW2 is a two channel universal remote footswitch that can be

used with ampliﬁ ers, rackmount effects or any device that has a footswitch

input. The BigShot SW2 may also be used to remotely control Radial Tonebone

switchers that feature a Slingshot input like the Headbone and Cabbone.

The SW2 can switch amp channels, turn on/off reverb or bypass a rackmount

effect. Both latching and pulse signals are supported, thus enabling the SW2

to control older ampliﬁ ers with contact closure type switching and newer

electronic pulse sensing ampliﬁ ers. The SW2 is powered by a standard 9 volt

adaptor (not included).

CONNECTING THE BIGSHOT SW2

Although the BigShot SW2 may be used with virtually any device with a

footswitch input, we will focus on guitar ampliﬁ ers.

If your amp uses a stereo ¼” TRS jack to control two functions, like channel

switching and reverb bypass, you can buy an “insert” type cable to connect the

SW2 or make one yourself. You can also use a balanced ¼” cable with a TRS

footswitch jack, but only one function will switch and which function will depend

on how the amp manufacturer has wired the TRS jack.

If your amp has one or two mono ¼” footswitch jacks then standard guitar

cable(s) are all you need to connect the SW2 to your amp.

Should your amp employ some other kind of multi-pin connection for the

footswitch, you may have to build a break-out adaptor cable to allow the SW2

to work with your system. To be safe, we suggest you discuss your speciﬁ c

needs with a qualiﬁ ed tech to ensure you get the right adaptor for your amp.

BigShot SW2 User Guide

Radial Engineering Ltd. BigShot SW2 User Guide

Radial Engineering Ltd.

USING THE BIGSHOT SW2

To assist in understanding the SW2 follow the block diagram from the left to

the right as each function is described.

TYPICAL SETUPS

Insert cable used with ¼”

TRS footswitch jack.

Guitar cables used with

separate footswitch jacks.

Amp and rack effect. The BigShot SW2 con-

trols channel switching and effect bypass.

Two amp setup. The BigShot SW2 controls

channels switching on both amps.

Stereo amp setup. The BigShot SW2 con-

trols channels switching on both amps.

Ampliﬁ er head and cabinet

switching with Radial Headbone.

Speaker cabinet and channel

switching with Radial Cabbone.

There are two footswitches (R1 & R2) that work independently or may be

linked together. The LINK switch lets you assign either of the two footswitches

as a master switch that controls both outputs.

The LATCH-PULSE switch lets you select the type of control signal going to

your amp. Older amps generally use a latch type control circuit, while newer

amps with electronic switching sense a momentary pulse. Your SW2 Slingshot

can produce both types of switching signals. Try the switch in both positions to

determine which works best with your amp.

The OPEN-CLOSED switch lets you toggle the relay switching between a

‘normally open’ or ‘normally closed’ status to match the way your amp has

been designed. Try the switch in both positions to determine the best setting

for your amp.

Because the BigShot SW2 features two outputs it can control more than one

device. You could, for example, connect the SW2 to a stereo setup with two

ampliﬁ ers and use the SW2 to control channel switching or effect bypass on

both amps. The LINK switch would be useful in this type of setup.

Another use would be controlling an amp and another device such as a

rackmount effect. One footswitch on the SW2 can connect to the amp for

channel switching and the other to the effect for bypass control. Independent

switching might be best in this type of setup. The best part is that the BigShot

SW2 allows you to customize how your setup to works.

SLINGSHOT

Remote switching is integrated into the Tonebone pedals, like the Headbone

and Cabbone, through a feature we call Slingshot. By connecting the SW2 to

a Slingshot input you may remotely switch ampliﬁ er heads (Headbone) and/or

speaker cabinets (Cabbone). A system may even be conﬁ gured so that two

functions switch simultaneously with a single foot stomp on the BigShot SW2.

For instance, when the SW2 is paired up with a Cabbone it is possible to

have the amp head switch channels at the same time the Cabbone switches

speaker cabinets. That’s synergy!

Single amp. The BigShot SW2 controls chan-

nel switching and effect bypass.

Produkt Specifikationer

Mærke:	Radial Engineering
Kategori:	Ikke kategoriseret
Model:	BigShot SW2

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering BigShot SW2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Radial Engineering Manualer

Radial Engineering PhazeQ Manual

18 Februar 2025

Radial Engineering J-Rak 8 Manual

11 Februar 2025

Radial Engineering Workhorse PowerStrip Manual

11 Februar 2025

Radial Engineering PreComp Manual

11 Februar 2025

Radial Engineering Tonebone PZ-Select Manual

11 Februar 2025

Radial Engineering Bones Hollywood Manual

23 December 2024

Radial Engineering 4-Play Manual

21 December 2024

Radial Engineering BigShot SW2 Manual

21 December 2024

Radial Engineering BigShot i/o Manual

21 December 2024

Radial Engineering Catapult Rack Manual

21 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025