Radial Engineering Hot-British V9 Manual

Radial Engineering Ikke kategoriseret Hot-British V9

Læs gratis den danske manual til Radial Engineering Hot-British V9 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Radial Engineering Hot-British V9, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
www.radialeng.com
True to the Music
Radial Engineering Ltd.
®
®
True to the Music
USER GUIDE
Radial Engineering Ltd.
Hot-British V9
™
Hot-British V9
FEATURES
RADIAL ENGINEERING 3 YEAR
TRANSFERABLE LIMITED WARRANTY
RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in
material and workmanship and will remedy any such defects free of charge according to the
terms of this warranty. Radial will repair or replace (at its option) any defective component(s)
of this product (excluding nish and wear and tear on components under normal use) for
a period of three (3) years from the original date of purchase. In the event that a particular
product is no longer available, Radial reserves the right to replace the product with a similar
product of equal or greater value. In the unlikely event that a defect is uncovered, please call
604-942-1001 or email service@radialeng.com to obtain an RA number (Return Authorization
number) before the 3 year warranty period expires. The product must be returned prepaid
in the original shipping container (or equivalent) to Radial or to an authorized Radial repair
center and you must assume the risk of loss or damage. A copy of the original invoice showing
date of purchase and the dealer name must accompany any request for work to be performed
under this limited and transferable warranty. This warranty shall not apply if the product has
been damaged due to abuse, misuse, misapplication, accident or as a result of service or
modication by any other than an authorized Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE
HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL EXTEND
BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE
YEARS. RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF
THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU
LIVE AND WHERE THE PRODUCT WAS PURCHASED.
Hot-British V9
™
User Guide - Part# R870 1027 00 / 09-2016 All rights reserved.
Specications and appearance are subject to change without notice.
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam BC V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
info@radialeng.com • www.radialeng.com
Circuit Type: Class-A discrete ..........................................................................
Frequency Response: Adjustable via tone and range controls ........................
Gain: ..........................................................................................................0dB
Mid Boost: 3-position switch boosts midrange by 0dB, +7dB, or +12dB.........
Footswitch: Latching bypass switch .................................................................
Power: 9VDC, adapter not included .................................................................
Radial Classic Specications
O V E R D R I V E - D I S T O R T I O N P E D A L
1. 9VDC POWER: Connection for 9 volt (center pin negative)
power adapter. Includes a cable clamp to prevent accidental
power disconnection.
2. OUTPUT: ¼” connection to your amplier.
3. INPUT: High-Z ¼” connection from your instrument.
4. LOW: Post-distortion EQ control for low frequencies.
5. HIGH: Post-distortion EQ control for high frequencies.
6. CONTOUR: Alters the character of the distortion, turn clockwise
for more high frequencies and counter-clockwise for a warmer
tone.
7. DRIVE: Used to adjust the overall amount of input gain and
distortion
8. MID BOOST: 3-position switch controls the midrange response.
9. BYPASS FOOTSWITCH: Latching switch bypasses the effects.
10. TOP END: 3-position switch controls the high frequency
response.
11. LEVEL: Sets the output volume of the pedal.
11
10 89
6
7
1 2 3
4
5
Radial Engineering Ltd. Radial Engineering Ltd. Radial Engineering Ltd.
Hot-British V9
Hot-British V9
Hot-British V9
™
OVERVIEW
Congratulations and thank you for purchasing the Hot-British V9, a compact
solid-state pedal capable of producing high-gain Plexi-style distortion. This
powerful pedal features multiple tone-shaping stages to provide a high
degree of sonic control, from subtle tube saturation to aggressive over-the-
top distortion.
Before using the Hot-British V9, have a read through this short user guide
to review the controls and features of the pedal. For further information
please visit the Radial website, where we post updates and frequently asked
questions from other users. If you still nd you have questions, send an email
to info@radialeng.com and we will do our best to respond in short order.
MAkING CONNECTIONS
Always make sure to turn your guitar amp down or off when connecting the
Hot-British V9. This will prevent loud turn-on transients that can cause damage
to your amplier. The Hot-British V9 does not come with a power supply as
most players will use a pedalboard power brick to supply power. You can use
a standard Boss® style 9V adapter, just make sure it has a 2.1mm barrel
connector wired for center-pin negative polarity. You can test that the pedal
is receiving power by depressing the footswitch; the LED light will illuminate
when the distortion circuit is active. The power cable can be afxed to the
pedal using the cable lock provided, preventing accidental disconnection.
Use a hex key to unscrew the cable lock, pass the cable through the cavity,
and then retighten.
FAQ
Can I use any multi-pedal power supply with the Hot-British V9?
Yes, so long as you provide the pedal with 9-12VDC, using a 2.1mm center-
pin negative connector with at least 40mA of current.
Can I use the Hot-British V9 with a battery?
No. The class-A circuitry of the Hot-British V9 is power hungry and will drain
a battery in no time.
Is the Hot-British V9 True-Bypass?
No, instead it is equipped with a Class-A input buffer and a carefully selected
load that replicates the feel and tone of true-bypass without the noise. This
enables the Hot-British V9 to drive pedal chains and long cables.
What is the difference between the original Hot-British and the V9?
The Hot-British V9 is a solid state version of the Hot-British that does not
employ a tube. It has been voiced to focus on the main Marshall sound that
has made the Hot-British popular.
Can I hurt the Hot-British V9 if I leave it on?
No. The Hot-British V9 power input is regulated and it can be left on without
much current draw.
Where should the Hot-British V9 be connected in the pedal chain?
The Class-A input buffers are really smooth sounding. So when placed near
the guitar in the signal chain, the Hot-British V9 will help smooth out the tone
of your other pedals and help reduce noise.
Can I use the Hot-British V9 on bass?
Yes. For optimal results, combine it with the Mix-Blender pedal. This lets you
blend in the amount of distortion with the clean tone. This setup retains the
bass and gives you the distorted crunch.
GETTING STARTED
Start with the controls set as pictured, with the LEVEL and TONE knobs at 12
o’clock and the DRIVE setting at 9 o’clock. Set the MID BOOST to the OUT (left)
position and the TOP END to NORMAL (middle). Turn your amplier on, slowly
turn up the LEVEL, and depress the footswitch to activate the Hot-British V9.
Test out different settings on the LEVEL control to get an idea of the output range
of the Hot-British V9, as it can provide a lot of gain to your signal. Now you can
experiment with the distortion stages of the pedal. The DRIVE setting determines
how much distortion you are applying to the signal, with a wide range from subtle to
extreme saturation. The CONTOUR control will warm up your sound as you turn it
counter-clockwise, and add more high frequency content as you turn it clockwise.
The post-distortion EQ controls on the Hot-British V9 give you the ability to dial in
the tone you are looking for. HIGH and LOW knobs allow you to boost or cut the
high and low frequencies, with a large amount of gain available on both controls.
The 3-position MID BOOST switch provides a bump in the midrange frequencies
so your guitar can really cut through for soloing, while the TOP END switch gives
you an overall adjustment over how bright your sound is.
start position
All of the controls on the Hot-British V9 are quite powerful, so small adjustments
will have a noticeable impact on the overall sound. Experiment, have fun, and
explore the many sonic possibilities at your ngertips.
Our FAQ’s are updated as we receive questions from users like yourself. If
you have a question you dont see answered ll out the form on our website
and we will be sure to reply in short order.
www.tonebone.com
BUFFER
INPUT
DRIVE
TONE
SHAPING
STAGE
DISTORTION
CONTOUR
TOP END
OUT
+12dB
+7dB
MID-BOOST
TONE CONTROLS
HIGH
LOW
LEVEL
OUTPUT
Normal
DARK
BRIGHT
ON
INPUT

Produkt Specifikationer

Mærke: Radial Engineering
Kategori: Ikke kategoriseret
Model: Hot-British V9

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering Hot-British V9 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Radial Engineering Manualer

Radial Engineering

Radial Engineering JS3 Manual

20 Juli 2025
Radial Engineering

Radial Engineering Loopbone Manual

18 Juli 2025
Radial Engineering

Radial Engineering JS2 Manual

18 Juli 2025
Radial Engineering

Radial Engineering JR-5 Manual

18 Juli 2025
Radial Engineering

Radial Engineering JX62 Manual

17 Juli 2025
Radial Engineering

Radial Engineering North-Star Manual

17 Juli 2025
Radial Engineering

Radial Engineering PreMax Manual

15 Juli 2025
Radial Engineering

Radial Engineering Workhorse WR-8 Manual

14 Juli 2025
Radial Engineering

Radial Engineering SGI-44 Manual

14 Juli 2025
Radial Engineering

Radial Engineering Catapult Rack TX Manual

2 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW

MSW -JJS-E1K Manual

17 August 2025
Bellari

Bellari BA525 Manual

17 August 2025
YA-MAN

YA-MAN Deep Skin Clear Manual

17 August 2025
Singercon

Singercon SIN-ALD-3000 Manual

17 August 2025
LG

LG 32LQ631C0ZA Manual

17 August 2025
Vivax

Vivax TS-7504G Manual

17 August 2025
MSW

MSW -ECJ-12-02 Manual

17 August 2025
CSL

CSL 300963 Manual

17 August 2025
Mars Gaming

Mars Gaming MCPU-VR Manual

17 August 2025
MSW

MSW -PLO-1350 Manual

17 August 2025