Radial Engineering JDV-Pre Manual


Læs gratis den danske manual til Radial Engineering JDV-Pre (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Radial Engineering JDV-Pre, eller vil du spørge andre brugere om produktet?

Side 1/12
True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
JDV-Pre 500
Instrument Preamp and DI
500 Series Module
www.radialeng.com
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
WARNING NOTICE TO USER!
The Radial JDX 500 is not a load box. This means that if you are using it with a guitar
amplifi er it must be connected to a speaker cabinet or some type of load box. Failure
to do so could result in damaging the JDX and your amplifi er which of course would not
be covered under warranty. Always ensure you have proper cables and connections
have been checked. We recommend using high quality 12 gauge speaker cables.
Because the JDX 500 can also be used as a direct input from a guitar, we have
instituted a slow ashing LED to let you know when you are in this mode. This safety
measure reminds you that you should not connect a guitar amplifi er output to the JDX
when in guitar mode as this may damage the JDX.
Although preventative safety measures have been designed into Radial 500 series
products we strictly advise against hot-swapping modules or plugging and
unplugging them when the Workhorse or other 500 series rack is powered on. Hot
swapping can cause connection sparks at the card-edge connector that could send
damaging transients to other equipment. This also greatly reduces the life span of the
contacts. Damage due to hot swapping is not covered under warranty. There are no
user serviceable parts inside.
Radial® JDV-Pre 500 User Guide
Table of Contents ......................................................Page
Feature Set .................................................................... 1
Overview ........................................................................ 2
Getting Started ............................................................... 4
Using and Adjustments .................................................. 6
Specifi cations ................................................................. 9
Block Diagram ................................................................ 9
Warranty ........................................................... Back cover
Congratulations you’ve done it! You have invested in what we believe is one of the
most musical sounding instrument preamps ever made. The JDV-Pre went through many
design revisions before we nally decided to release it to market. Why so long? Each time
we plugged it in, we found ourselves asking for extra bits that could make the JDV that much
better.
What this really means is that behind what appears to be a simple control panel are lots of
extra cool features that have been carefully incorporated into the design. And the only way
to take full advantage of them is to actually read this manual. Once you have done so, there
may be questions that have not been answered. For these, we kindly ask that you visit the
JDV-Pre FAQ page. This is where we answer questions from users, like yourself, with the
latest information that can be helpful when using the JDV-Pre live on-stage or in the studio.
If of course you cannot nd what you are looking for, either post a question on the FAQ or
feel free to send us an email at info@radialeng.com and we will do our very best to get back
to you in short order.
Now close your eyes and listen. You are about to hear your vintage Fender Jazz bass for
the very fi rst time.


Produkt Specifikationer

Mærke: Radial Engineering
Kategori: Ikke kategoriseret
Model: JDV-Pre

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering JDV-Pre stil et spørgsmål nedenfor, og andre brugere vil svare dig