Radial Engineering SixPack Manual

Radial Engineering Ikke kategoriseret SixPack

Læs gratis den danske manual til Radial Engineering SixPack (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Radial Engineering SixPack, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

True to the Music

www.radialeng.com

True to the Music

User Guide

Workhorse™

SixPack™

500 Series Rack

www.radialeng.com

Radial Engineering Ltd.

1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada

tel: 604-942-1001 • fax: 604-942-1010

email: info@radialeng.com

IMPORTANT SAFETY & USER NOTICE

FOR PROFESSIONAL USE ONLY

Radial 500 series power racks are specically designed for use by

qualied professional audio engineers. The open frame design is not

intended for use by consumers or those unfamiliar with this format.

Even though the current and voltage levels are relatively low, we

recommend that all slots be lled with a module or covers be placed

over unlled slots. This will help protect you from electrical shock.

These power racks are designed to be used with 500 series modules

manufactured by Radial or others that follow the 500 series format.

Even though there is no formalized standard, Radial has endeavored

to take every step possible to ensure cross-brand compatibility. To this

end, Radial has produced a free PDF download called the Workhorse

Open Source Document (Whos.Doc) that outlines the mechanical

and electrical requirements for module designs. Manufacturers are

invited to consult this document in order to assist in assuring cross-

platform compatibility with both current and older 500 series formats.

Users should also consult this document and ensure the module

being used follows the prescribed pin-out conguration.

The user should ensure that the module current requirements do

not exceed the available current provided by the power rack. It is

also important that when securing the module to the frame that the

retainer screws not be over tightened or cross threaded. This will

prevent damaging the treads and ensure a longer rack life.

Finally, hot swapping or exchanging modules when power is on

can shorten the life of the card-edge connector. Although Radial

has incorporated extra safety measures, hot swapping is not

recommended. Damage caused by hot swapping is not covered

under the Radial Limited Warranty. The user is responsible for any

damage to the racks or modules arising out of hot swapping and the

user shall save Radial Engineering Ltd. harmless should any damage

occur. Please consult the Radial Limited Warranty for further details.

! !

Produkt Specifikationer

Mærke:	Radial Engineering
Kategori:	Ikke kategoriseret
Model:	SixPack

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering SixPack stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Radial Engineering Manualer

Radial Engineering JS3 Manual

20 Juli 2025

Radial Engineering Loopbone Manual

18 Juli 2025

Radial Engineering JS2 Manual

18 Juli 2025

Radial Engineering JR-5 Manual

18 Juli 2025

Radial Engineering JX62 Manual

17 Juli 2025

Radial Engineering North-Star Manual

17 Juli 2025

Radial Engineering PreMax Manual

15 Juli 2025

Radial Engineering Workhorse WR-8 Manual

14 Juli 2025

Radial Engineering SGI-44 Manual

14 Juli 2025

Radial Engineering Catapult Rack TX Manual

2 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW -JJS-E1K Manual

17 August 2025

Bellari BA525 Manual

17 August 2025

YA-MAN Deep Skin Clear Manual

17 August 2025

Singercon SIN-ALD-3000 Manual

17 August 2025

LG 32LQ631C0ZA Manual

17 August 2025

Vivax TS-7504G Manual

17 August 2025

MSW -ECJ-12-02 Manual

17 August 2025

CSL 300963 Manual

17 August 2025

Mars Gaming MCPU-VR Manual

17 August 2025

MSW -PLO-1350 Manual

17 August 2025