Radial Engineering Workhorse Cube Manual

Radial Engineering Ikke kategoriseret Workhorse Cube

Læs gratis den danske manual til Radial Engineering Workhorse Cube (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Radial Engineering Workhorse Cube, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

www.radialeng.com

True to the Music

User Guide

Workhorse™

Cube™

500 Series Power Rack

www.radialeng.com

Radial Engineering Ltd.

1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada

tel: 604-942-1001 • fax: 604-942-1010

info@radialeng.com • www.radialeng.com

IMPORTANT SAFETY & USER NOTICE - FOR PROFESSIONAL USE

The Radial Workhorse Cube is specically designed for use by

qualied professional audio engineers. The open frame design is not

intended for use by consumers or those unfamiliar with this format.

Even though the current and voltage levels are relatively low, we

recommend that all slots be lled with a module or covers be placed

over unlled slots. This will help protect you from electrical shock.

The Cube™ rack frame is designed to be used with 500 series or what

are commonly known as Lunchbox™ modules. The Workhorse has

been designed following the framework as outlined by the VPR Alliance

as described on the API™ website. Although some manufacturers build

modules that are not VPR compliant, they may in fact work with the Cube.

Please consult those specic manufacturers for details regarding their

compatibility. The Radial Workhorse Open Source Document outlines the

required technical specications for manufacturers that intend to have

their modules used in a Workhorse or Cube frame. Compatibility of any

modules other than a module made by Radial Engineering Ltd. is the sole

responsibility of the user. Please read the Limited Radial Warranty for

details. There are no replacement or user serviceable parts inside.

SAFETY NOTICE - NO HOT SWAPPING OF MODULES

Hot Swapping, or exchanging modules while the power is on is not covered

under the Radial Limited Warranty. The user is responsible for any damage to

the Workhorse Cube or module arising out of hot swapping and the user shall

save Radial Engineering Ltd. harmless should any damage occur. Please

consult the Radial Limited Warranty for further details.

Produkt Specifikationer

Mærke:	Radial Engineering
Kategori:	Ikke kategoriseret
Model:	Workhorse Cube

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering Workhorse Cube stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Radial Engineering Manualer

Radial Engineering PhazeQ Manual

18 Februar 2025

Radial Engineering J-Rak 8 Manual

11 Februar 2025

Radial Engineering Workhorse PowerStrip Manual

11 Februar 2025

Radial Engineering PreComp Manual

11 Februar 2025

Radial Engineering Tonebone PZ-Select Manual

11 Februar 2025

Radial Engineering Bones Hollywood Manual

23 December 2024

Radial Engineering 4-Play Manual

21 December 2024

Radial Engineering BigShot SW2 Manual

21 December 2024

Radial Engineering BigShot i/o Manual

21 December 2024

Radial Engineering Catapult Rack Manual

21 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025