Rane RPS 4 Manual

Rane Ikke kategoriseret RPS 4

Læs gratis den danske manual til Rane RPS 4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Rane RPS 4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Rane MPE Users Guide

equipment rack. With the Rane FVL 22 Remote

Volume Level controller and the RPS 4, continuous

volume and EQ presets can be controlled by a

couple of knobs on a wall plate or in a lectern!

The wiring diagram for a simple two program

selector is shown below. This will toggle between

programs 1 and 2.

The Rane RWS 4 is a four position wall mount

switch designed to fit a 75 ohm coax wall plate. It

will supply four program changes to the MPEs using

any 3 conductor cable. Here's an actual size drawing

along with the wiring diagram.

RPS 4 Remote Program Selector

In some applications, it may be desirable to switch

the MPE programs from a remote location, without

the use of a computer or MIDI controller. A simple

switch to change programs can also make operation

a lot easier for the non-technical person who may be

responsible for operating the sound system. The RPS

4 comes to the rescue.

Simply, the RPS 4 converts contact closures to

MIDI program changes. Depending on your require-

ments, the RPS 4 can generate up to 16 program

changes (1-16). These MIDI program change com-

mands can simultaneously change your EQ curve(s)

on your MPE and/or any other MIDI controlled

device in your system. The sound equipment can

then be locked up in a rack somewhere else, possibly

minimizing cable runs and curious fingers. Presets

can be made for different program material, occu-

pancy changes, different mics or placement, music

or speech. The switch can be located away from the

Rane MPE Users Guide

Here is a wiring diagram to use with momentary

contact pushbuttons with optional LED indicators.

This idea can be used for 2, 3 or 4 program changes.

Use of the RPS 4 is pretty obvious and shouldn’t

present any problems. Here is a short check list:

1. Connect a MIDI cable (standard 5-pin DIN)

between the MIDI OUT jack on the RPS 4 and

the MIDI IN jack on the MPE. When controlling

more than one MIDI unit at a time, connect the

RPS 4 MIDI OUT jack to the MIDI IN jack on

the first MPE, then connect the MIDI THRU

jack from the first MPE to the MIDI IN jack on

the second MPE, and so on. (Do not use the MPE

MIDI OUT jacks. MPE MIDI OUTs won't carry

the program change.)

2. If controlling an MPE, disconnect the power

supply cable from the red POWER jack on the

MPE and reconnect it to the POWER jack on the

RPS 4. Next, using the cable supplied, connect

the POWER OUT jack on the RPS 4 to the

MPE’s red POWER jack. All other applications

require using the optional Rane RS 1 remote

power supply (NOT SUPPLIED). Connect the RS

1 to either red POWER jack.

3. Use the MIDI CHANNEL SELECTOR to set

the desired channel. All units being controlled

must use the same MIDI channel. Refer to the

diagrams on the top of the RPS 4 for the correct

switch settings.

4. The final step is wiring up the switches. Refer to

the diagrams above for several choices. The RPS

4 works with all types of switches.

Note there is an internal jumper option labelled

BINARY or PUSHBUTTON. All RPS 4s are

shipped with this jumper installed in the PUSH-

BUTTON mode. As the name implies, this is the

correct position when using momentary pushbuttons

to change programs. Changing the jumper to the

BINARY position allows using the minimum

number of interconnecting wires. Sometimes this

represents a significant cost savings and conve-

nience.

Using a binary encoded switch, 16 MIDI program

changes can be activated. A four pole, sixteen throw

switch can also be used. A switch with fewer posi-

tions (such as an eight throw switch) may be used by

omitting the extra connections.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Ikke kategoriseret
Model:	RPS 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane RPS 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Rane Manualer

22 Juni 2025

22 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

20 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

BSS Audio FCS-926 Manual

14 September 2025

Brandson 303842 Manual

14 September 2025

AMX DGX-O-DXF-MMS Manual

14 September 2025

Brandson 304024 Manual

14 September 2025

JILONG JL097109NPF Manual

14 September 2025

Brandson 303403 Manual

14 September 2025

AMX DVX-2250HD Manual

14 September 2025

AMX Vision² Manual

14 September 2025

AMX NMX-ENC-1100 Manual

14 September 2025

AMX UPC20+ Manual

14 September 2025