Rane Via 10 Manual

Rane Ikke kategoriseret Via 10

Læs gratis den danske manual til Rane Via 10 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Rane Via 10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Manual-1

OPERATORS MANUAL Via 10

ETHERNET BRIDGE

WEAR PARTS: This product contains no wear parts.

Introduction

Normally, one would find our Quick Start at this

location. But to break with tradition and keep us all on our

toes, we thought we’d be different. After all, the Via 10 is

different in that it has no audio connections. Many Via 10

users employ the Via 10 to run Rane’s RW 232 devices

over a standard Ethernet LAN. Such users need only read

the Configuring the Via 10 & PC (page Manual-4) and the

RW 232 section under Hardware (page Manual-6) to get

rolling. Those who want the Quick Start need only think of

these two sections as the Quick Start. See, it’s not that

different.

This document is organized in four parts. Part one is a

short description of the front and rear panel controls found

on the Via 10 (page Manual-2). Part two is Configuring the

Via 10 & PC (page Manual-4) which explains what the Via

10 Config Utility does. It also reviews the computer setup that

is required so the computer can talk through the Via 10’s IP

(Internet Protocol) “language.” Part three goes over the

Hardware details of the Via 10’s I/O ports (page Manual-6).

Four sections are found: RS-232; RS-485; Versatile Input

Port (VIP); and the Versatile Output Port (VOP). OK, so VIP

and VOP should have been forever retired as cheesy splash

screens from the old Batman TV series. For those who watch

Dilbert, it is true that naming things like this is always the

hardest part of product development. Part four gets into

Microsoft’s ActiveX controls and how to use them to control

RW 232 and other parameters (page Manual-9). Part four also

contains the ActiveX Control details of the Via 10 and other

Rane-specific ActiveX controls for our computer-controllable

products.

Manual-2

FRONT PANEL DESCRIPTION

햲 HOST indicator lights only when the Via 10’s internal host microprocessor “talks” (reads or writes) to the VIP or VOP.

햳 RS232 indicator illuminates when there is activity on the Via 10’s RS-232 port.

햴 RS485 indicator flashes when there is activity on the Via 10’s RS-485 port.

햵 CONFIG button is recessed, only used to set the Via 10’s IP address during initial setup. See Configuring the Via 10 & PC

on page Manual-4.

햶 PWR indicator lights when the Via 10 is powered. It flashes when in Via 10 CONFIG mode.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Ikke kategoriseret
Model:	Via 10

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane Via 10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Rane Manualer

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 304227 Manual

20 Juni 2025

Ciarra CBCS5931B Manual

20 Juni 2025

IFM PL1507 Manual

20 Juni 2025

LC-Power Integrator Pro LC6650B-SI V3.1 Manual

20 Juni 2025

Ciarra CBCS6903D Manual

20 Juni 2025

Curtis enGage II Manual

20 Juni 2025

Parkside HG10350 Manual

20 Juni 2025

Phoenix Gold ZDT-OPEL2 Manual

20 Juni 2025

Dahua Technology IVS-IP8000-E-GU1 Manual

20 Juni 2025

Icom IC-F29SR2 Manual

20 Juni 2025