Rangemaster RMB60HPEIGL Manual

Rangemaster Komfur RMB60HPEIGL

Læs gratis den danske manual til Rangemaster RMB60HPEIGL (52 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Rangemaster RMB60HPEIGL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

Operating Instructions

Sony Corporation  2001 Printed in Korea

RM-XM10

Marine Remote

Commander

3-225-765- (1)11

Specifications

Dimensions 84.9 × × 18.8 84.9 mm (w/h/d) (3

3/ 8×3/ 4× 3 3/8 in.)

Mass Approx. 113 g (4 oz.)

Supplied accessories Parts for installation and connections (1 set)

Design and specifications are subject to change without notice.

Parts list

2 3

5 6

( 2)×

M4 65×

( 2)×

Dimensions Unit: mm (in.)

M4 45×

( 2)×

MASTER UNIT

CHANGER COMMANDER/

DISPLAY

59 (2

)

50 (2) 25 (1)

84.9 (3 3/ )8

* 23.9 (31/ )32

8 (11/ )32

4.8 (

)

15 (

)

5 m (196 7/8 in.) 5 m (196 7/8 in.)

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this

product.

Model No. RM-XM10 Serial No.

500 (19

)

18.8

(

)

200 (7

)

9 0

54 (2 1/ )4

For the customers in the USA

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

Features

With this remote commander, you can control your car audio equipment easily.

Use this remote commander with master units equipped with the special input jack for the rotary

commander and the Sony Bus system control.

Location and function of controls

The following buttons (except the SOURCE and MODE button) share the same functions as those on

the master unit or the wireless remote commander.

For more information about the functions of each button or control, refer to the operating instructions

of your Sony car audio equipment.

1VOL (volume) + – button

2ATT (attenuate) button

Press to attenuate the sound momentarily.

3SOURCE button

Press to select program sources.

4SEEK/AMS button

During tape or CD/MD playback:

•AMS* function: Locates the beginning of tracks. Each time you press either side of the button a

track is skipped.

To skip several tracks at once, press either side of the button momentarily and release. Within one

second, press it again and hold it.

* Automatic Music Sensor.

•Manual search: Locates the desired part of a track. Press and hold either side of the button until

the desired part is located. When the desired track is reached, release.

During radio/TV reception:

•Automatic tuning: Automatically tunes in to a station. When a station is tuned in, the search stops

automatically. Press either side of the button momentarily several times until a desired station is

tuned in.

•Manually searches for a station. Press either side of the button until the desired station is tuned

in. If you press again within one second, you can continue manually search for another station.

5MODE button

•Changes the playback side of the cassette.

•Selects CD units when several CD units are connected.

For example: CD1 t CD2 t ···

•Selects MD units when several MD units are connected.

For example: MD1 t MD2 t ···

•Changes the preset groups.

For example: FM1 t FM2 t AM t ···

•Changes the TV/AUX (video) mode.

6OFF button

Press to turn off the unit.

7DISC/PRST button

•Fast-winds the tape. To resume normal playback, press the MODE button.

•Changes the disc when one or more CD/MD units are connected.

•Receives the stations memorized on the preset number buttons on the master unit.

8ATT (attenuate) indicator

When the ATT function is on, the ATT indicator blinks.

9Source information

0Mode information

Source Source information (9 0) Mode information ( )

Tuner FM1, FM2, AM Frequency

Tape TAPE • FWD (Forward)

• REV (Reverse)

• FF (Fast-forward)

• REW (rewind)

CD/MD CD, MD Disc number (with the CD/MD units) and Track number

TV TV Channel number

Video AUX – – – –

Volume VOL Volume level

Installation

Notes

• Choose the mounting location carefully so that the remote commander:

— will not interfere with driving the motorboat.

— can easy of operate the remote commander and the display is to see.

— will not get wet or dirty from sea water, rain, dust, etc.

— is not subject to high temperatures, such as from direct sunlight.

• Be sure to use only the supplied mounting hardware for a safe and secure installation.

• When installing the remote commander, be sure not to damage the electrical cables etc., on the other side

of the mounting surface.

1Make the mounting holes as follows.

Connection

MASTER UNIT

CHANGER COMMANDER/

DISPLAY

1 2 or

345

ø 8.5 (11/ )32

ø 24.5 (31/ )32

54 (2 1/ )4

Unit: mm (in.)

CD/MD changer

6 7

Not supplied

(supplied with CD/MD changer)

Master unit with Sony BUS system

Notes

• Be sure all the cords, connection plugs, and the

divide box are located and fixed in position so that

they are not subjected to high temperatures,

vibration, sea water, rain, dust, etc.

• When finished making all the connections, press

the RESET button of the master unit.

• When you connect the remote commander to the

master unit and other units (CD/MD changer etc.),

refer also to the Installation/Connections manual of

the master unit and other units.

• You cannot connect more than two CD/MD

changers.

Master unit

After connecting, bundle up the connecting

cords of the remote commander with other

connecting cords of the audio equipment by

attaching the supplied clamp . Be sure to0

leave some slack in the connecting cord

between the plug and the clamp as

illustrated.

Produkt Specifikationer

Mærke:	Rangemaster
Kategori:	Komfur
Model:	RMB60HPEIGL
Antal effektniveauer:	2
Vekselstrømsindgangsspænding:	230 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	550 mm
Dybde:	485 mm
Højde:	49 mm
Vægt:	8600 g
Produktfarve:	Sort
Kontroltype:	Berøring
Indbygget skærm:	Ja
Skærmtype:	LED
Pakkevægt:	10000 g
Pakkebredde:	590 mm
Pakkehøjde:	150 mm
Automatisk slukning:	Ja
Husmateriale:	Glas
Placering af apparat:	Indbygget
Grill:	Ingen
Børnesikring:	Ingen
Certificering:	CE
Komfurtype:	Zone induktionskogeplade
Overfladetype:	Keramisk
Antal kogeplader / madlavningsområde:	4
Antal elektriske kogeplader:	4
Blus/kogeplade zone 1 strøm:	1400 W
Blus/kogeplade zone 2 strøm:	1850 W
Blus/kogeplade zone 1 type:	Regelmæssig
Kogezone 1 form:	Rund
Blus/kogeplade zone 1 position:	Venstre bagende
Blus/kogeplade zone 1 strømkilde:	Elektrisk
Blus/kogeplade zone 2 type:	Stor
Kogezone 2 form:	Rund
Blus/kogeplade zone 2 position:	Venstre front
Blus/kogeplade zone 2 strømkilde:	Elektrisk
Kontrolposition:	Top forside
Tilsluttet belastning (elektrisk):	7700 W
Ovnbredde størrelse:	60 cm
Blus/kogeplade zone 3 type:	Stor
Blus/kogeplade zone 4 type:	Regelmæssig
Blus/kogeplade zone 2 diameter:	220 mm
Blus/kogeplade zone 1 diameter:	180 mm
Blus/kogeplade zone 3 diameter:	220 mm
Blus/kogeplade zone 4 diameter:	180 mm
Blus/kogeplade zone 4 strømkilde:	Elektrisk
Kogezone 4 form:	Rund
Blus/kogeplade zone 3 strømkilde:	Elektrisk
Kogezone 3 form:	Rund
Blus/kogeplade zone 3 position:	Højre bagende
Blus/kogeplade zone 4 position:	Højre forside
Indbygget hætte:	Ingen
Tilsluttet belastning (gas):	- W
Blus/kogeplade zone 4 strøm:	1400 W
Blus/kogeplade zone 3 strøm:	1850 W
Boost funktion:	Ja
Kogezone 2 boost:	2100 W
Kogezone 3 boost:	2100 W
Antal boostere:	2