Reflecta Visilux Studio Kit 130 Manual

Reflecta Ikke kategoriseret Visilux Studio Kit 130

Læs gratis den danske manual til Reflecta Visilux Studio Kit 130 (30 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Reflecta Visilux Studio Kit 130, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

MANUAL (p. 2 )

ANLEITUNG (s. 4 )

Photo studio

Fotostudio

MODE D’EMPLOI (p. 6 )

GEBRUIKSAANWIJZING (p. 8 )

Studio de photo

Fotostudio

MANUALE (p. 10 )

MANUAL DE USO (p. 12 )

Photo studio

Foto estudio

HASZNÁLATI ÚTMUTATÓ (o. 14.)

KÄYTTÖOHJE (s. 16 )

Fotóstúdió

Valokuvastudio

BRUKSANVISNING (s. 18 )

NÁVOD K POUŽITÍ (s. 20 )

Foto studio

MANUAL DE UTILIZARE (p. 22 )

ΕΓΧ

ΕΓΧΕΓΧΕΙΡΙ

ΕΙΡΙ

ΕΙΡΙΕΙΡΙ∆ΙΟ

∆ΙΟ

∆ΙΟ∆ΙΟ Σ

ΣΣ Σ

ΣΣ σ

σσελ

ελ

ελελXPH H ( .24 )

Studio foto

Photo studio

BRUGERVEJLEDNING (p. 26 )

VEILEDNING (p. 28 )

Fotostudie

Photo studio

ENGLISH

1. Test button

2. Photocell

3. ‘Ready’ indicator

4. Mains ON/OFF

5. Fuse

6. Modeling lamp switch ON/OFF

7. Sync cord

8. Flash power control

Flash Energy 0 W 13

Typical recycle time 2 Seconds

Stepless ash power control Full to 1/8

Recommended modeling lamp E14 bulb 75 W

Flash colour temperature Approx. 5500 K

Flash trigger Light, sync cord, manual infrared, radio.

Trigger voltage 12 V

Operating voltage 180 230 V-

Output precision Within 1%

Operation:

Switch the unit ON and set the “Flash power control” and “Modeling lamp switch” as required. When the unit

has charged to the required level, the red “Ready” indicator will light. The “Test button” should be pressed to

ensure that the flash is of the required power. Plug in the “Sync cord” and connect to the camera shutter at

“X” synchronization. Alternatively, use the built in “Photocell” or plug in the “Radio remote control receiver”.-

Power supply connections

220 V AC 50 Hz. Use the main lead supplied to connect to the main supply.

Main ON/OFF switch

Set the red illuminated On/Off switch to “ ” to turn the unit ON.

Flash power selection

The unit can oer stepless power variation from full to 1/8, rotate the power control to adjust the power

you need.

Charge

When first switched to “ ”, the red illuminated ON/OFF switch will light up. When the unit has charged to the

level set by the flash power selector, the red “Ready” Indicator will light up again. Your ash light is now ready.

Produkt Specifikationer

Mærke:	Reflecta
Kategori:	Ikke kategoriseret
Model:	Visilux Studio Kit 130

Har du brug for hjælp?

Hvis du har brug for hjælp til Reflecta Visilux Studio Kit 130 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Reflecta Manualer

Reflecta Super 8 Normal 8 Manual

7 August 2024

Reflecta LED Light Pad A4+ Manual

5 August 2024

Reflecta Visilux Studio Kit 130 Manual

1 August 2024

Reflecta LED Light Pad A4 Super Slim Manual

1 August 2024

Reflecta DigiEndoscope Manual

30 Juli 2024

Reflecta Visilux Studio Kit 300 Manual

23 December 2023

Reflecta Episcope A4 Manual

22 August 2023

Reflecta Caelos 100 Manual

9 April 2023

Reflecta Cubus 253 Manual

18 November 2022

Reflecta Caelos 300X Manual

29 Oktober 2022

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

XO D1HPBF Manual

16 Juni 2025

Fantech RS1 Manual

16 Juni 2025

Playtive IAN 425414 Manual

16 Juni 2025

Playtive IAN 321249 Manual

16 Juni 2025

Playtive IAN 115930 Manual

16 Juni 2025

Aiphone GT-102HB Manual

16 Juni 2025

Playtive HG05516 Manual

16 Juni 2025

Playtive IAN 295154 Manual

16 Juni 2025

Playtive IAN 324362 Manual

16 Juni 2025

Playtive IAN 302521 Manual

16 Juni 2025