Reloop RMX-30 BT Manual

Reloop DJ Gear RMX-30 BT

Læs gratis den danske manual til Reloop RMX-30 BT (20 sider) i kategorien DJ Gear. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Reloop RMX-30 BT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Instruction Manual

CAUTION!

For your own safety, please read this operation manual careful-

ly before initial operation! All persons involved in the installation,

setting-up, operation, maintenance and service of this device must

be appropriately qualied and observe this operation manual in de-

tail. This product complies with the requirements of the applicable

European and national regulations. Conformity has been proven.

The respective statements and documents are deposited at the

manufacturer.

Bedienungsanleitung

ACHTUNG!

Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicher-

heit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die

mit der Aufstellung, Inbetriebnahme, Bedienung, Wartung und In-

standhaltung dieses Gerätes zu tun haben, müssen entsprechend

qualiziert sein und diese Betriebsanleitung genau beachten. Dieses

Produkt erfüllt die Anforderungen der geltenden europäischen und

die Konformität wurde nachgewiesen, die

rungen und Unterlagen sind beim Hersteller

emploi

curité, veuillez lire attentivement ce mode

mière utilisation ! Toutes les personnes char-

de la mise en service, de l‘utilisation, de

enance de cet appareil doivent posséder les

ires et respecter les instructions de ce mode

est conforme aux directives européennes et

ité a été certiée et les déclarations et docu-

sion du fabricant.

de instrucciones

seguridad, ¡lea detenidamente este manu-

tes de la primera puesta en marcha! Todas

adas con el montaje, la puesta en marcha, la

miento y la reparación de este equipo deben

ualicadas y haber leído con atención este

es. Este producto cumple con los requisitos

eas y nacionales, se ha comprobado la con-

aciones y los documentos correspondientes

fabricante.

lektrischen Schock zu vermeiden, setzen

Wasser oder Flüssigkeiten aus! Öffnen Sie

an electric shock do not expose the device

e ou une décharge électrique, veillez à tenir

es liquides et de l‘humidité ! N´ouvrez jamais

descargas eléctricas, ¡no sumerja este equi-

stancias líquidas! ¡Nunca abra la carcasa!

aufbewahren!

rther reference!

s pour des utilisations ultérieurs!

o posterior!

mbH & Co. KG

many

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02-05

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06-09

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13

Español 14-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ENGLISH

Before operating this equipment we ask you to carefully study and observe all instructions. Please remove the RMX-30 BT from its packaging.

Check before an initial operation to make sure that the device has not been visibly damaged during transport. If you detect any damage to the

power cable or the casing, do not operate the device. Contact your specialized dealer.

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling power voltage. This voltage rating may lead to a critical electrical shock! Any

damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage

to property or for personal injury caused by improper handling or non-observance of the safety instructions.

- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety

instructions and warnings contained in this operation manual.

- For reasons of safety and certication (CE) the unauthorized conversion and/or modication of the device is prohibited. Please note that in the event of

damage caused by the manual modication to this device, any warranty claims are excluded.

- The inside of the device does not contain any parts which require maintenance, with the exception of worn parts that can be exchanged from the

outside. Qualied staff must carry out maintenance, otherwise, the warranty does not apply!

- The AC inlet acts as a disconnect device. Ensure that power is not applied until the unit is fully set up. Always connect the mains plug last. Ensure that

the mains switch is in the OFF position when connecting the unit to the power supply.

- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer if you

have any questions.

- Ensure that when setting up the product the power cable is not squashed or damaged by sharp edges.

- Disconnect the device when not in use and before cleaning! Be sure to hold the power plug by the body. Never pull the power cord!

- Position the device on a horizontal and stable base.

- Avoid any concussions or violent impact when installing or operating the device.

- When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be sure that no cables lie

around openly. You will endanger your own safety and that of others!

- Do not rest any containers lled with liquid that could easily spill onto the device or its immediate vicinity. If, however, uids should access the inside of

the device, immediately disconnect the power plug. Have the device checked by a qualied service technician before reuse. Damage caused by uids

inside the device is excluded from the warranty.

- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct

exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents.

Always ensure sufcient ventilation.

- The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused at this moment may

destroy your device. Do not switch on or operate the device until it has reached ambient temperature!

- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth.

Never use solvents or cleaning uids with a petroleum base for cleaning.

- When relocating, the device should be transported in its original packaging.

- At commercial facilities, the regulations for the prevention of accidents as stipulated by the organization of professional associations must be observed.

- At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.

- Keep this operation manual in a safe place for later reference in the event of questions or problems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

- This device is a mixing console which can regulate and mix low level audio signals. The device is thereby connected between a signal source and an

audio amplier or active speakers, respectively.

- If the device is used for other purposes than those described in the operation manual, damage can be caused to the product, leading to the exclusion

of warranty rights. Moreover, any other application that does not comply with the specied purpose harbors risks such as short circuits, res, electrical

shocks, etc.

- The serial number determined by the manufacturer must never be removed to uphold the warranty rights.

MAINTENANCE

- Check the technical safety of the device regularly for damage to the power cable or the casing, as well as for wear out of wear parts such as buttons

and switches.

- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected and secured against accidental use. Always

disconnect the power cable from the outlet!

- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer functions, following longer

storage under unfavorable conditions or after major transport stress.

DESIGNATIONS

1. Signal Input Switch

2. Gain

3. 3-Band Equalizer

4. Linefader

5. Crossfader

6. Bluetooth Button

7. Mic Level

8. Mic Equalizer

9. Cue Mix

10. Cue Level