Remotec BW0378 - Universal Remote Control Manual

Remotec Fjernbetjening BW0378 - Universal Remote Control

Læs gratis den danske manual til Remotec BW0378 - Universal Remote Control (26 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Remotec BW0378 - Universal Remote Control, eller vil du spørge andre brugere om produktet?

Side 1/26
Universal Remote Control (URC)
Operating Instructions
Télécommande Univeiselle (TCU)
Mode D’emploi
Universal - Fernbedienung (UFB)
Bedienungsanleitung
Telecomando Universale (URC)
Istruzioni Pen L’uso
Control Remoto Universal (CRU)
Instrucciones De Operacion
For English Reader .................................................................... Page 1-3
Pour Les Lecteurs Francais ....................................................... Page 4-7
Für Deutsche Leser ................................................................. Seite 8-10
Per le Lettore Italiano .......................................................... Pagina 11-13
Para Lectores De Español .................................................. Pagina 14-16
Congratulations! Your Universal Remote Control (URC) is a state-of-the-art
device which integrates many different infra-red remote controls to deliver
instant A/V action to your fingertips.
Before operating the remote, please read thoroughly (1) the interior of the
coversheet and (2) this manual. Then reserve them for future reference.
1HOW TO INSTALL BATTERIES
Alkaline batteries recommended. The number of battery required stated at
the back of the coversheet.
1. Remove the battery cover on the back of your URC.
2. Observe the polarity of the batteries and the “+/–” marks inside the battery
compartment.
3. Insert the batteries.
4. Push the battery cover back in place.
Battery Low
If the indicator flashes twice slowly after your invoking of any command, it
shows that the battery level is low. You must replace them with new batteries
to ensure proper functioning.
2HOW TO SET UP THE URC
By entering Device Code
You may setup the URC by the following code entering instructions.
1. Refer to the DEVICE CODE LIST, look up the 4-digit Device Code which
corresponds to the brands of your A/V equipment. If there are more than
one Device Code listed under your brand, try from the first code.
2. Press a desired Device Mode Key (e.g. ).
3. Hold down P+ and “ VOL– ”on the URC together simultaneously for 2
seconds until the indicator lights up.
4. Use the number keys to enter your 4-digit Device Code, the indi-
cator should go out immediately.
Turn on your device (e.g. TV), try the function keys on the URC. If your device
(e.g. TV) responds to your invoked function correctly, you have entered the
right Device Code. Otherwise, repeat the above setup instructions with the
rest available Device Codes until your device (e.g. TV) responds to your in-
voked function, and most keys work correctly.
* Simply repeat the above procedures to enter the Device Codes for your
VCR, SAT, DVD or CTV. (Remember to press a correct Device Mode Key
in step 2 above)
1
English
Note :
DVD, CTV and other Device Codes can be entered into any device modes
except “TV” & “VCR” modes. Just simply press the device mode key
and enter your 4-digit device code for DVD, CTV and other devices.
If the indicator flashes twice in step 4, a wrong Device Code has been
entered. You are required to repeat step 2 to 4 again.
Suggestion :
If you cannot find a correct Device Code for your equipment, see 2 HOW
TO SET UP THE URC– By Seaching Through the Library.
You are recommended to jot down your Device Codes in the space provided
on back label after setting up the URC correctly for future reference.
TV


Produkt Specifikationer

Mærke: Remotec
Kategori: Fjernbetjening
Model: BW0378 - Universal Remote Control

Har du brug for hjælp?

Hvis du har brug for hjælp til Remotec BW0378 - Universal Remote Control stil et spørgsmål nedenfor, og andre brugere vil svare dig