Renegade RX6.2C Manual

Renegade Højttaler RX6.2C

Læs gratis den danske manual til Renegade RX6.2C (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Renegade RX6.2C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

OPERATION GUIDE

BETRIEBSANLEITUNG

P U R E C A R A U D I O E N G I N E S

RX 6.2C

16,5 CM COMPONENT-SYSTEM

INSTALLATION

The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker

components carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears.

2. Try to mount the speakers on the same plane. That is, they should be at the same height and directly

across from each other. Do not mount one speaker higher, lower, further forward or further back from the

opposite speaker.

3. Always check behind the chosen mounting locations to ensure that there is proper clearance for the back

of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.

4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker

deck. There should be no gaps between the speaker basket and the mounting surface.

CAUTION

Please ensure the correct polarity (+ or -) for all connections.

Never connect loudspeakers directly with the vehicle’s chassis or power supply.

WIRING DIAGRAM AND INTERCONNECTION

ENGLISH

PLUS

MINUS

PLUS

MINUS

WOOFER TWEETER

IN-LINE

X-OVER

PLUS

MINUS

SPEAKER OUTPUTS OF THE AMPLIFIER

+ L – + R –

PLUS

MINUS

PLUS

MINUS

PLUS

TWEETER WOOFER

WOOFER INTERCONNENCTION:

• Connect the plus-cable (white marking) of the included in-line crossover with the plus-terminal of the

woofer (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with

the minus-terminal of the woofer. Detect the correct cable-pair by the two different sized terminal jacks.

TWEETER INTERCONNECTION:

• Connect the plus-cable (white marking) of the included in-line crossover with the “plus-terminal of the

tweeter (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with

the minus-terminal of the tweeter. Detect the correct cable-pair by the two similar sized terminal jacks.

AMPLIFIER INTERCONNECTION:

• Connect the plus-cable (white marking) of the included in-line crossover with the plus-speaker output

of the amplifier (e.g. + L). Repeat this procedure with the minus-cable (no marking) and connect it with

the regarding minus-speaker output of the amplifier (e.g. + L).

Repeat the above mentioned procedure for all other channels of the sound system.

Produkt Specifikationer

Mærke:	Renegade
Kategori:	Højttaler
Model:	RX6.2C
Produktfarve:	Sort
Impedens:	4 ohm (Ω)
Højttaler, type:	2-vejs
Driverenhed:	165 mm
Form:	Oval
Subwoofer inkluderet:	Ingen
Vurderet effekt:	100 W
Maksimal strøm:	200 W
Indbygningsdybde:	57 mm
Diameter for monteringshuller:	143 mm
Separate komponenter:	Ja
Diskanthøjttaler, magnettype:	Neodym