Revel Performa3 B112v2 Manual

Revel Subwoofer Performa3 B112v2

Læs gratis den danske manual til Revel Performa3 B112v2 (11 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Revel Performa3 B112v2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

B112V2/B110V2 Subwoofer

Quick Start Guide

2B112V2/B110V2 Subwoofer

Quick Start Guide

ABOUT REVEL PERFORMA3 V2

SUBWOOFERS

Thank you for purchasing a Revel Performa3 V2 subwoofer. The

B112V2 and B110V2 are powered by a 1,000-watt RMS (2,000-watt

peak) internal ampliﬁer and feature a custom-designed transducer that

combines a new level of low frequency detail, musicality and reﬁnement

with unprecedented brute-force visceral impact. The internal ampliﬁer’s

high power with an integrated Parametric Equalization (PEQ) system

results in a new standard of high ﬁdelity bass performance for home

entertainment systems.

The B112V2 and B110V2 feature 12-inch and 10-inch versions,

respectively, of a brand-new coated paper/pulp low-frequency

transducer that has been designed speciﬁcally for use in these two

subwoofer models. The primary design goal for this new driver was to

produce very low frequencies at extremely high sound pressure level

(SPL) while at the same time maintaining extremely low distortion –

qualities that are usually mutually exclusive. This new unit maintains

a precise engineering balance between the voice coil, spider and

surround that produces linear motion of all three for lower distortion by

incorporating Klippel-optimized, high-linearity motor geometry:

• The extremely long (50mm) two-layer copper voice coil wound on

a high heat-tolerant ﬁberglass former gives this transducer a very

large range of travel (Xmax) for dramatically increased output with

low distortion.

• A high-temperature Nomex® spider features a progressive roll

design that evenly distributes mechanical stress, helping keep

the cone’s motion linear during high-excursion operation.

• The over-sized SBR rubber surround allows greater linear

excursion while providing enhanced moving-mass control. This

material also withstands the physical breakdown typical of

common foam surrounds.

The coated cellulose/pulp cone and dustcap assembly is vented to aid in

the exchange of air, which reduces acoustic losses and increases output.

The transducer’s massive Klippel-optimized magnet assembly (19.2 lb.

in both the B112V2 and B110V2) features a double-stacked ceramic 5

magnet with a ﬂared vent to improve airﬂow and reduce turbulence.

The result is increased bass output and lower distortion. A thick motor

shorting ring improves inductance linearity to further reduce distortion

and increase output. Extra cooling vents in the back plate increase

power handling and reduce power compression. Combined, these

changes increase the linear excursion 82% from the previous version.

The cast aluminum frame is fully vented to minimize acoustic losses

caused by excessive backpressure. This frame also maintains

dimensional stability and precise mechanical tolerances, allowing

the transducer to be assembled with a high degree of precision. The

structure and mass of the frame make it very strong as well as help pull

more heat away from the voice coil.

The B112V2 and B110V2 enclosures are formed with contiguous wood

layers that prevent splitting. They feature strategically-oriented bracing

that eliminates the possibility of vibration and coloration. The beautiful,

modern enclosure is ﬁnished in high-gloss piano black, walnut or white

in a process developed and overseen by Italian luxury cabinet makers

that exceeds automotive ﬁnish quality.

During development, every Revel loudspeaker model is compared to

competitive models in our unique position-independent double-blind

listening lab. This process utilizes the latest psychoacoustic research

to assure that these listening tests are valid, enabling us to verify that

all Revel loudspeakers are superior to their competitors before they are

allowed to go into production.

TABLE OF CONTENTS

About Revel Performa3V2 Subwoofers 2 ...................................................................................................................................

B112V2/B110V2 Overview 3 .......................................................................................................................................................

Subwoofer Placement Considerations..................................................................................................................................... 4

Placing a Single Subwoofer, Placing Two Subwoofers, Placing Four Subwoofers

Making Connections 6 ................................................................................................................................................................

Connecting to a Surround Processor with an Internal Crossover, Connecting to a Stereo Preampliﬁer,

Connecting Multiple Subwoofers, Trigger and Power Connections

Caring for Your Subwoofer....................................................................................................................................................... 9

Speciﬁcations 10 .........................................................................................................................................................................

Warranty 10 ................................................................................................................................................................................