Revox V218 Manual


Læs gratis den danske manual til Revox V218 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Revox V218, eller vil du spørge andre brugere om produktet?

Side 1/2
C18 Multiuser Wall Control
With the C18 Multiuser Wall Control, commands (IR triggers) can be sent to the Multiuser
system that are stored in the Multiuser Server. The function is defined in the Configurator
itself. In addition, a different behaviour can be defined between a short and a long
keystroke.
Via the integrated IR receiver (to the left of the power button), infrared codes (RC5) can be
received from IR remote controls and forwarded to the Multiuser System for IR triggers.
With the help of the DIL switches on the back of the wall-mounted keypad, different RC5
addresses can be selected in case of IR conflicts with other remote controls/devices.
Command overview
Code page option for C18 wall-mounted keypad available from SW version 1.00 onwards
** RC5 code is combined with current user/source address, i.e. if user 2 (address 21) was selected last, e.g. the volume_up
command is also assigned address 21 and an RC5 command [21] [16] is sent.
Checking of RC5 command
The defined RC5 codes can be checked through the display on the Multiuser amplifier M30 or V219. The infrared mode
can be selected with its Setup button, the received signals from the IR Link inputs can be detected and its RC5 address and
command can be displayed.
IR display of the Multiuser amplifier M30 or V219
DIL switch
With the introduction of SW version 218-2 1.00 (Multiuser Programmer Software), there is a code page option for the C18
Multiuser Wall Control. 4 different code pages can be selected via DIL switches 3 and 4 on the back of the C18 wall keypad.
To do this, dismantle the wall control and remove the plastic cover on the back. The desired code page can now be set
with a small screwdriver. Please observe the current ESE regulations when the cover is open so as not to damage the
electronics.
Button
Description
Code
Page 1
Code
Page 2
Code
Page 3
Code
Page 4
User 1 Favorit
Short keystroke: last favorit of User 1
Long keystroke: favorit no. 1 of User 1
[17] [63]
[24] [63]
[25] [63]
[26] [63]
User 2 Favorit
Short keystroke: last favorit of User 2
Long keystroke: favorit no. 1 of User 2
[20] [63]
[24] [55]
[25] [55]
[26] [55]
User 1
Select User 1
[07] [63]
[24] [56]
[25] [56]
[26] [56]
User 2
Select User 2
[21] [63]
[24] [57]
[25] [57]
[26] [57]
Local Input
Select local analogue input of the user
[19] [63]
[24] [51]
[25] [51]
[26] [51]
Track_down
[**] [33]
[24] [19]
[25] [19]
[26] [19]
Track_up
[**] [32]
[24] [18]
[25] [18]
[26] [18]
Volume_down
[**] [17]
[24] [21]
[25] [21]
[26] [21]
Volume_up
[**] [16]
[24] [20]
[25] [20]
[26] [20]
Power Off
Short keystroke: switch-off room
Long keystroke: switch-off the complete system
[**] [12]
[24] [39]
[25] [39]
[26] [39]


Produkt Specifikationer

Mærke: Revox
Kategori: Ikke kategoriseret
Model: V218

Har du brug for hjælp?

Hvis du har brug for hjælp til Revox V218 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Revox Manualer

Revox

Revox Joy S120 MK2 Manual

1 September 2024
Revox

Revox Joy S119 MK2 Manual

1 September 2024
Revox

Revox Voxnet V219 Manual

21 August 2024
Revox

Revox V218 Manual

20 August 2024
Revox

Revox KNX Gateway Manual

19 August 2024
Revox

Revox B77 Manual

19 August 2024
Revox

Revox Control V255 Manual

19 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer