Rigol RM-2-DP700 Manual

Rigol Ikke kategoriseret RM-2-DP700

Læs gratis den danske manual til Rigol RM-2-DP700 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Rigol RM-2-DP700, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
InstallationGuide RIGOL
1
DP700 Rack Mount Kit
RM-2-DP700
This rack mount kit (RM-2-DP700) is designed to mount two RIGOL DP700 series
programmable linear DC power supplies into a 19-inch cabinet that conforms to the
Electronic Industries Association (EIA) standard.
Kit Part Checklist (RM-2-DP700)
No. Name Qty. Description
1 Right Fastener 1 --
2 Filler Panel 1 --
3 Connecting Plate A 1 --
4 Connecting Plate B 1 --
5 Left Fastener 1 --
6 M4 Screw 26 M4x8 Phillips Pan Head Screw
7 M4 Screw 4 M4x8 Phillips Countersunk Flat Head Screw
8 Rail 2 --
9 Bottom Plate 1 --
10 Side Beam Fastener 4 --
11 Retaining Bracket 2 --
12 M6 Screw 12 M6x16 Phillips Pan Head Screw
13 M6 Nut 12 M6 Square Lock Cage Nut
RIGOL
3
4
6
7
2
1
5
89 10
11
6 7 12 13
InstallationGuide RIGOL
2
Installation Tool
The PH2 Philips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met:
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 4U.
The depth of the cabinet should be at least 500 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
1. Remove the four rubber protective covers located at the four corners of the front
panel and the four ones at the corners of the rear panel of the instrument
respectively.
2. Attach two rails (with the U-channel
facing outward) to both sides of the
bottom plate, and then fasten them
with eight M4 pan head screws.
3. Attach two side beam fasteners to
the front ends of each rail, as shown
in the figure below, and then secure
them with four M4 pan head screws.

Produkt Specifikationer

Mærke: Rigol
Kategori: Ikke kategoriseret
Model: RM-2-DP700

Har du brug for hjælp?

Hvis du har brug for hjælp til Rigol RM-2-DP700 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Rigol Manualer

Rigol

Rigol MHO2024 Manual

9 September 2025
Rigol

Rigol MHO2034 Manual

9 September 2025
Rigol

Rigol HDO1204 Manual

2 September 2025
Rigol

Rigol PLA2216 Manual

2 September 2025
Rigol

Rigol DP711 Manual

28 August 2025
Rigol

Rigol DP811 Manual

28 August 2025
Rigol

Rigol DP712 Manual

28 August 2025
Rigol

Rigol PHA0150 Manual

28 August 2025
Rigol

Rigol M301 Manual

6 Juni 2025
Rigol

Rigol NFP-3 Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Calorex

Calorex Delta DT 6 Manual

30 Oktober 2025
Eliminator Lighting

Eliminator Lighting LED Cloud Manual

30 Oktober 2025
Abus

Abus Smartvest Pro APP45000 Manual

30 Oktober 2025
Owon

Owon OWH80 Manual

30 Oktober 2025
SilentiumPC

SilentiumPC Navis EVO ARGB 120 Manual

30 Oktober 2025
Iogear

Iogear GRSH02 Manual

30 Oktober 2025
Russell Hobbs

Russell Hobbs Inspire 24363-70 Manual

30 Oktober 2025
EKO

EKO K550UDGC Manual

30 Oktober 2025
APC

APC NetShelter AP7900B Manual

30 Oktober 2025
Philips

Philips Evnia 32M3C3540 Manual

30 Oktober 2025