RIKON 11-600S Manual

RIKON Savmaskine 11-600S

Læs gratis den danske manual til RIKON 11-600S (28 sider) i kategorien Savmaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om RIKON 11-600S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

11-600S

10 Portable Table Saw w/Stand”

www.rikontools.com

11-600SM1

Operator’s Manual

Record the serial number and date of purchase in your manual for future reference.

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167

SAFETY RULES

WARNING: For your own safety, read all of the instructions and

precautions before operating tool.

PROPOSITION 65 WARNING: Some dust created by

using power tools contain chemicals known to the state of

California to cause cancer, birth defects or other reproductive

harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks and cement and other

masonry products.

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures vary, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

work in a well ventilated area and work with approved safety

equipment. Always wear OSHA/NIOSH approved, properly tting

face mask or respirator when using

such tools.

CAUTION: Always follow proper operating procedures as

dened in this manual — even if you are familiar with use of

this or similar tools. Remember that being careless for even a

fraction of a second can result in severe personal injury.

BE PREPARED FOR THE JOB

• Wear proper apparel. Do not wear loose clothing, gloves,

neckties, rings, bracelets or other jewelry which may get

caught in moving parts of machine.

• Wear protective hair covering to contain long hair.

• Wear safety shoes with non-slip soles.

• Wear face mask or dust mask if operation is dusty.

TABLE OF CONTENTS

Safety Rules..

...............................................................................2-5

Unpacking.......................................................................................5

Assembly......................................................................................6-9

Installation & Specications...

.....................................................9-10

Operation..

...............................................................................10-13

Adjustments.............................................................................14-15

Maintenance.................................................................................15

Troubleshooting............................................................................16

Parts Diagrams & Lists............................................................17-27

Warranty.......................................................................................27

• Wear safety glasses complying with United States ANSI

Z87.1. Everyday glasses have only impact resistant lenses.

They are safety glasses. NOT

• Be alert and think clearly. Never operate power tools

when tired, intoxicated or when taking medications

that cause drowsiness.

PREPARE WORK AREA FOR JOB

• Keep work area clean. Cluttered work areas invite

accidents.

• Do not use power tools in dangerous environments. Do not

use power tools in damp or wet locations. Do not expose

power tools to rain.

• Work area should be properly lighted.

• Keep visitors at a safe distance from work area.

• Keep children out of workplace. Make workshop childproof.

Use padlocks, master switches or remove switch keys to

prevent any unintentional use of power tools.

• Keep power cords from coming in contact with sharp

objects, oil, grease and hot surfaces.

TOOL SHOULD BE MAINTAINED

• Always unplug tool prior to inspection.

• Consult manual for specic maintaining and adjusting

procedures.

• Keep tool lubricated and clean for safest operation.

• Remove adjusting tools. Form habit of checking to see that

adjusting tools are removed before switching machine on.

• Keep all parts in working order. Check to determine that

the guard or other parts will operate properly and perform

their intended function.

• Check for damaged parts. Check for alignment of moving

parts, binding, breakage, mounting and any other condition

that may a󰀨ect a tool’s operation.

• A guard or other part that is damaged should be properly

repaired or replaced. Do not perform makeshift repairs.

(Use parts list provided to order replacement parts.)

• Maintain proper adjustment of rip fence and blade guard.

• Never adjust saw while running. Disconnect power to avoid

accidental start-up.

• Have damaged or worn power cords replaced immediately.

• Keep blade sharp for e󰀩cient and safest operation.

KNOW HOW TO USE THE TOOL

• Use right tool for the job. Do not force tool or attachment to

do a job for which it was not designed.

• Disconnect tool when changing blade.

• Avoid accidental start-up. Make sure that the tool is in the

“o󰀨” position before plugging in, turning on safety

disconnect or activating breakers.

• Do not force tool. It will work most e󰀩ciently at the rate for

which it was designed.

• Keep hands away from blade and moving parts and cutting

surfaces.

• Never leave tool running unattended. Turn the power o󰀨

and do not leave tool until it comes to a complete stop.

• Do not overreach. Keep proper footing and balance.

• Never stand on tool. Serious injury could occur if tool is

tipped or if blade is unintentionally contacted.

• Know your tool. Learn the tool’s operation, application and

specic limitations.

• Handle workpiece correctly. Press rmly against table.

Protect hands from possible injury.

• Turn machine o󰀨 if it jams. Blade jams when it digs too

deeply into workpiece. (Motor force keeps it stuck in the

work.)

• Feed work into the blade only as recommended in

“Operation.”

WARNING: For your own safety, do not operate your saw

until it is completely assembled and installed according to

instructions.

STABILITY OF SAW

If there is any tendency for the saw to tip over or move during

certain cutting operations, such as cutting extremely heavy

panels or long heavy boards, the saw should be bolted down.

If you attach any kind of extensions over 24" wide to either

end of the saw, make sure you support the outer end of the

extension from the bench or oor, as appropriate.

Produkt Specifikationer

Mærke:	RIKON
Kategori:	Savmaskine
Model:	11-600S

Har du brug for hjælp?

Hvis du har brug for hjælp til RIKON 11-600S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Savmaskine RIKON Manualer

RIKON 10-600VS Manual

27 December 2024

27 December 2024

27 December 2024

27 December 2024

27 December 2024

27 December 2024

27 December 2024

27 December 2024

Savmaskine Manualer

Nyeste Savmaskine Manualer

Güde GSS 400 Manual

12 Januar 2025

Cocraft PRO RT18-PL Manual

12 Januar 2025

Hikoki C 6BU3 Manual

11 Januar 2025

Dedra DED7060 Manual

11 Januar 2025

Sun Joe SWJ599E Manual

11 Januar 2025

Hikoki C10FSB Manual

11 Januar 2025

Metabo STA 18 LTX 150 BL Manual

11 Januar 2025

Craftsman 917.377662 Manual

11 Januar 2025

Maruyama MCV51 Manual

11 Januar 2025

Vonroc JS505DC Manual

9 Januar 2025