Ring Video Doorbell Pro 2 Manual

Ring Dørklokke Video Doorbell Pro 2

Læs gratis den danske manual til Ring Video Doorbell Pro 2 (9 sider) i kategorien Dørklokke. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Ring Video Doorbell Pro 2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

What installation accessories are in the box?

Item name Image Dimensions With Din Rail

Transformer With Plug-In Adapter

Long Mounting Screws 3.5cm 2 2

Wall Anchors 5mm 2 2

Security Screws 0.47cm 2 2

Short Mounting Screws 1.58cm 2 2

Wire Nuts 5 2

Wire Extenders 2 2

Cable Clips 0 10

Ring Screwdriver 1 1

Step 1: Download the Ring App

Step 2:Start the setup in the Ring App

Step 3:Powering your Device

Step 4: Uninstalling your existing doorbell

Step 5: Installing your device with the included Corner Mount

Step 6: Installing your device without the included Corner Mount

Step 7: Restore power at the consumer unit

Step 8: In-app Setup

Step 9: Securing your device

Step 1: Download the Ring App

The Ring App walks you through setting up and managing your Ring Doorbell. Search for “Ring” in one of the app stores below, or visit ring.com/app.

Step 2: Start the setup in the Ring App

In the Ring app, select Set Up a Device and follow the in-app instructions. The app will guide you through the setup, but you can refer to the below steps

for additional guidance.

If you're setting up with the Plug-In Adapter, you can choose to temporarily connect your doorbell to your home wifi network before physically installing

your device.

Click here for more information on setting up your Device in the Ring App.

Step 3: Powering the Device

Ways to power your Doorbell Pro 2

1: No existing doorbell

If you don't have an existing doorbell, the Video Doorbell Pro 2 can either be powered with:

The Plug-In Adapter (skip to this step)

Din-Rail Transformer (electrician recommended)

2: Existing wired doorbell

If you have an existing doorbell, your new device can be installed with the included Din-Rail Transformer.

To install with the included Din-Rail Transformer:

If, like most doorbells in Europe, your doorbell only works at 8-12 Volts AC, your existing transformer won't have enough power to support your Ring

device, and will need to be replaced by the included 24 Volt Ring transformer.

1. Find your doorbell chime

Your Doorbell Pro 2 is designed to replace an existing doorbell button, and gets its power from the doorbell system. Ring your existing doorbell and listen

for the chime. If it rings, you'll know your existing doorbell system is working. Follow the sound to find your chime and make a mental note of the location.

We’ll return to your chime soon.

2. Locate your existing transformer

Your existing transformer can be found in one of the following places, and can be found with the label of having 8-12 Volts AC power:

Your consumer unit

Combined with your existing Chime

Mounted separately in your home

Produkt Specifikationer

Mærke:	Ring
Kategori:	Dørklokke
Model:	Video Doorbell Pro 2
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	49 mm
Dybde:	22 mm
Højde:	114 mm
Produktfarve:	Sort, sølv
Wi-Fi:	Ja
Wi-Fi-standarder:	802.11b,802.11g,Wi-Fi 4 (802.11n),Wi-Fi 5 (802.11ac)
Driftstemperatur (T-T):	-20.5 - 48.5 °C
Hurtig start guide:	Ja
Forbindelsesteknologi:	Trådløs
Strømkilde type:	DC
Nem at installere:	Ja
Indbygget kamera:	Ja
Indgangsspænding:	24 V
Frekvens:	5000 Mhz
Skruer inkluderet:	Ja
Bedste anvendelsesmuligheder:	Hjem
Klokke bredde:	49 mm
Klokke højde:	114 mm
Klokke dybde:	22 mm
Horisontalt synsfelt:	150 °
Vertikalt synsfelt:	150 °