Rio Scanning Laser X60 Manual

Rio Let hårfjerningsapparat Scanning Laser X60

Læs gratis den danske manual til Rio Scanning Laser X60 (1 sider) i kategorien Let hårfjerningsapparat. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Rio Scanning Laser X60, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

LAHC5

CLASS 1 PRODUCT

CONTAINING

CLASS 3B LASER

808nm

wavelength

Wearing laser

safety goggles is

unnecessary as

the product has

been designed

with inbuilt safety

features.

PATENTS PENDING

This product MUST be used responsibly.

Please read these Instructions carefully

before use.

Refer to your Information Guide for:

• WARNINGS

• SECURITYBUTTONSEQUENCE

• HOWDOLASERSWORK?

• SUITABLESKINTYPES

• PATCHTEST

• HAIRGROWTHCYCLE

• WHYISASERIESOFTREATMENTS

REQUIRED?

• YOURQUESTIONSANSWERED

• TROUBLESHOOTING

™

SALON ASERL

SCANNING HAIR REMOVER x60

W A R N I N G S

• Readallinstructionsthoroughlyandretainforfuturereference.

• Not suitable for Afro-Caribbean, black skincomplexions or forGreyHair.

See“SuitableSkinTypes”inInformationGuide.

• Laserhairremovalshouldnotcausediscomfort,youmayfeelindividualhairs

beingtreated,whichislikeamildpinprick,andaslightwarmingofthearea.

Ifyoufeelanydiscomfortorsorenessthesettingmaybetoohigh.

• Inbuiltsafety featuresprotecttheeyebeing exposedtothelaser,however,

neveraimtheWandatorneareyes.

• DoNOTusenearflammablematerials.

• Keeptheproductoutofreachofchildrenandpets.

• ReflectionHazard:Pleaseremovealljewelleryinthevicinityofthetreatment

areabeforeuse.

• Whennotinuse,storethekeyresponsiblyinasafeplaceawayfromchildren.

• Donottreatthesamehairrepeatedlyinanyonesession.

• Donotuseafterdrinkingalcoholorifyouarefeelingunwellorfatigued.

• Donottreatthefollowingareas:tattoos,permanentmake-up,pimples,warts,

haironblackspotsormoles,darkfreckles,skindisease,birthmarks,burns,

lips,nipples,genitalor analareas,eczema,eyelashes,eyebrows, nearthe

eyes,nasalorearhair.

• Thisisa sensitivelaser scanningproduct.Careshouldbetakentoavoid

damagetothemechanismintheWand.

• This appliance is not intended for use bypersonswithreduced physical,

sensoryormentalcapabilities,orlackofexperienceandknowledge,unless

they have been given supervision or instruction concerning use of the

appliancebyapersonresponsiblefortheirsafety.

PRECAUTIONS

• DoNOT dismantleorrepair.Ifyou haveany problemsusingtheproduct,

contactourCustomerCareDepartment.

• Misuseoftheunitcancauseharm.

• DoNOToverrideanysafetyfeaturesoropentheunitorwand.

• OnlyusethisproductwiththeMainsAdaptersupplied.

• KeepWandawayfromstrongelectromagneticfieldsandmagnetsduringuse.

PATCHTEST

IMPORTANT:24hoursbeforetreatmentitisveryimportanttodoapatchtest.

Thepatchtestwillconfirmthemaximumpowerlevelforyourskintype.Eacharea

tobetreatedmustbecheckedasskincolourcanvary.Pleaserefertothe‘PATCH

TEST’sectionintheInformationGuideandontheDVDforinstructions.

Aslightrednessmayoccur,butnot always,withinanhouroftreatment.This

localisedrednessiscausedbythedestructionofthehairfolliclesandisquite

normal.However,ifanyrednessremainsafter24hoursthiswouldindicatethe

powerlevelselectedwastoohighforyourskintype.

GETTINGSTARTED

Please ensure you read the Information Guide and understand the

‘Warnings’ and ‘Product Safety’ sections before proceeding.

• Shavetheareatobetreated.Thisensuresthatthelasergoesdirectly

tothehairrootandavoidshairburningonthesurface.

• Removealljewelleryinthevicinityofthetreatmentarea.

• Pleaseensureyouhavepatchtestedtheareatobetreated24hours

prior to treatment.

STEP 1

ConnectMainsAdapterintotheDCPowerSocket at

thebackoftheunitandplugintotheMains.

STEP2

Unlock with Key to turn on. The light around the

Keyswitchwillflashgreen.

STEP 3

Enterthe“SECURITYBUTTONSEQUENCE”.

You will find the Security Button Sequence in the

Information Guide.

ThegreenlightaroundtheKeyswitchwillfullyilluminate.

Thelightsaroundthex60SCAN,x20SCANandSINGLE

buttonswillflashbluereadyforselection.Thebottom

PowerLevelIndicatorlightwillilluminate.

STEP4

Usethe+/- buttonstoselectthe correctpowerlevel

foryourskintype.Refertothe‘PatchTest’sectionof

theInformationGuideforskintypes.

Each time the power setting is adjusted, you will

need to reselect x60 SCAN, x20 SCAN or SINGLE

modetocontinue.

Note: Ifno buttons are pressedafter20 minutes the Unit willenter energy

saving mode. The orange light will flash and power level1will remainon.

TorestartturnkeyoffandbackonagainandstartatStep3.

ADDITIONALINFORMATION

STEP 8

Turn the Keyswitch anticlockwise to lock the unit.

RemovetheKeytoasafeplaceawayfromchildren.

Note: Ifyouexperienceunexpectedbehaviourofthisproductthenitispossible

someexternalelectromagneticinterferenceisresponsiblee.g.electricmotors/

loudspeakersetc.Youshouldremovethis sourceandrestartthe productto

restorefulloperation.Atnotimewillthelaserfireunintentionally.

‘SINGLE’HAIRTREATMENT

Youcanopttotreatsingle hairsusing

theSINGLEmode.

Press the ‘SINGLE’ button once.

TheSINGLEbuttonwillilluminateblue.

The orange light on the Wand

willilluminate.

FollowthesameprocedureforSCANtreatmentfromStep6,butthistime

pressing the SINGLE button.

In SINGLEmode, the blue lightaround theSINGLE

buttonwillflash.

Referto‘TreatmentArea’section,SINGLEmode.

“ SECURITY

BUTTON

SEQUENCE”

TREATMENTAREA

Asaguidetothetreatmentarea,asmallindentationmarkwillbeleftby

pressingthe Wanddownontheskin.Inx60SCAN mode,overlapping

theindentationmarkslightlywhenmovingtheWandineachdirectionwill

ensureeffective coverage. Inx20SCANmode, overlaptheindentation

markbyhalf.

SCANmodessequentiallytargetsinglehairsineachtreatment.

SINGLEmodeisfortreatingindividualhairs.Thetreatmentareaisinthe

centreoftheindentationguideandmeasures1mmx1mm.

‘SCAN’HAIRTREATMENT

STEP 5

Press the x60 SCAN button once. The

blue light around the button will fully

illuminate.Theorangelightonthewand

willilluminate.

Alternatively,pressthex20SCANbuttononce.

STEP6

Placethewandontheskinovertheareayouwishtotreat,

ensuringtheTouchPinsareincontactwiththeskin.

TheorangelightwillturnOFFandthewhite‘ready’light

willturnON.

Thebluelights around theSCAN button will rotate to

indicatetreatmentisreadytostart.

STEP 7

Press and HOLD the Laser Button on the top of the

wandtostartlasertreatment.

The white light will flash on and off to indicate laser

treatmentisinprogressandtheunitwillbeeprepeatedly

(thiscanbemuted).Youwillnotbeabletoseethelaser.

You may feel individual hairs being treated, whichis

likeamildpinprick,and aslightwarmingof thearea

beingtreated.

Whenthe laser treatmentceases, theorangelightwill

comebackon.Youcannowmoveontothenextareaof

hairstobetreated.

Whenmoving thewand tothenextarea ofhairstobe

treated the Touch Pins must beremovedbriefly from

theskin.

Refertoscanmodesin‘treatmentarea’section.

IMPORTANTNOTES - please read carefully

• DoNOTmovethewandduringtreatment.Youmaynoticethewandbecomes

warmduringusethisisquitenormal.

• IfcontactislostbetweentheTouchPinsandskinduringtreatment,thewand’s

orangelightwillcomeon.Treatmentwillresumewhencontactismadeagain.

• Foryoursafety,ifthewandisnotpositionedcorrectlyontheskinsurfacefor

treatment,thewhiteandorangelightswillflashalternatelyandoperationof

thelaserwillbedisabled.

• Sometimesyou can smell faint burning or even see a very, smallline of

smokeasthehairistreated.

• Successfullytreatedhairsdonotalwaysfalloutimmediately,butare shed

over time as they are released from the hair follicle, light rubbing can

encouragethis.

• Youmayfeela‘pinprick’sensationduringtreatment.Anylocalisedrednessafter

treatmentiscausedbythedestructionofthehairfolliclesandisquitenormal.If

anyrednessremainsafter24hoursthiswouldindicatethepowerlevelselected

wastoohighforyourskintype.Pleaserefertothe‘PatchTest’sectioninthe

InformationGuide.Anylongerlastingrednesswillalsodisappear.

L A S E R  H A I R  T R E A T M E N T

PresstheMUTEbuttononthebackoftheUnittoturn

offtheBeepnoises.Pressagaintoturnbackon.

Note: Thisdoesn’tturnoffwarningbleeps.

resettingafter‘lockout’

If you experience a ‘lockout’ as indicated by

repeated flashingof any ofthe bluepower lights,

simply resetby turning the unit off usingthekey,

waiting5secondsandturningtheunitonagain.

cleaninglaseraperture

Periodically check whether there are any smoke

deposits on the Laser Aperture. A build up of

depositswillaffecttheefficiencyofthelaser.Ifyou

noticeanydeposits,switchtheunitOFFandunplug

themainsadapter.Thensimplycleanwithalintfree

clothorcottonbud,ensuringnofibresareleftinthe

LaserAperture.

x60 SCANmode

x20 modeSCAN

SINGLEmode

Rio,Dezac,SalonLaserScanningHairRemoverx60andLaserSafeTechnologyaretrademarksofTheDezacGroupLtd©TheDezacGroupLtd2011anufacturedbyTheDezacGroupLtd,POBox17,Cheltenham,EnglandGL537ET

Overlapbyathird

Overlapbyhalf

treatmentarea

indentationmark

treatmentarea

indentationmark

treatmentarea

indentationmark

1-IN-LAHC5-UK/1.2

instructions

COMPONENTS

a. Mains Adapter

b. Keys

c. DC Power Socket

d. Mute Button

e. Keyswitch

f. Power Level Indicator

g. Power Increase Button (+)

h. Power Decrease Button (-)

i. x60 SCAN button

j. x20 SCAN button

k. SINGLE button

l. Hand-held Wand

m. Laser Button

n. Orange Light

o. White Light

p. Touch Pins

q. Laser Aperture

r. Indentation Guide

s. Front Face

laseraperture

Produkt Specifikationer

Mærke:	Rio
Kategori:	Let hårfjerningsapparat
Model:	Scanning Laser X60
Produktfarve:	Hvid
Pakkedybde:	85 mm
Pakkebredde:	240 mm
Pakkehøjde:	290 mm
Justerbar intensitivitet:	Ja
Hårfjernelsesteknologi:	Laser
Antal intensitetsniveauer:	5
Kropstilføjelse:	Ja
Præcision (ansigt) tilknytning:	Ja