Roadstar SPK-200BT Manual

Roadstar Højttaler SPK-200BT

Læs gratis den danske manual til Roadstar SPK-200BT (10 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Roadstar SPK-200BT, eller vil du spørge andre brugere om produktet?

Side 1/10
HANDS FREE BLUETOOTH SPEAKER
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale distruzioni
Manual de instrucciones
Manual de instruções
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
Roadstar management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)
SPK- 020BT/WH
1 2
WARNINGS
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
SPK-200BT/WH
HANDS FREE BLUETOOTH SPEAKER.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new
Bluetooth Speaker before using it for the first time. Please retain this manual for future
reference.
LOCATION OF CONTROLS
1. VOLUME UP / NEXT SONG 7. POWER ON / OFF SWITCH
2. VOLUME DOWN / PREVIOUS SONG 8. LIGHT INDICATOR
3. PLAY / PAUSE / PAIR BUTTON 9. Answering a call Button
4. MICROPHONE (hands free)
5. AUX IN INPUT
6. MINI-USB charging socket
CHARGING THE INTERNAL BATTERY
Remove carefully from the box the SPK-200BT and before starting using it, must be
recharged the internal Li-Po battery.
1) Connect the mini-USB cable (supplied) to any +5V USB 500 mA Power source (PC
or external AC Adapter).
2) When powered, the Light Indicatror (8) become RED.
POWER ON AND OFF
1) Move the Power switch (7) to switch ON the unit. A voice says “POWER ON” can be heard
from the speaker. The Light indicator (8) become BLUE.
2) To power OFF the unit, move the Power button (7) to OFF.
BLUETOOTH PAIRING
After power the Speaker ON, the blue Light indicator (8) start blinking to indicate that
the Speaker is waiting for pairing to Bluetooth transmitter devices.
During this condition, enable the Bluetooth function on your mobile phone or tablet until the
identification name SPK-200BT compare in the display.
Press “confirm device” in your mobile device until the voice ”PAIRING” can be hear from the
SPK-200BT. In case if your Bluetooth device ask the passwotd, digit “0000”.
If the pairing operation has been done correctely, the blue Light indicator (8) flash slowely
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
English English
72 1
345 6 8
9


Produkt Specifikationer

Mærke: Roadstar
Kategori: Højttaler
Model: SPK-200BT

Har du brug for hjælp?

Hvis du har brug for hjælp til Roadstar SPK-200BT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Roadstar Manualer

Højttaler Manualer

Nyeste Højttaler Manualer