Robot Coupe CL 40 Manual

Robot Coupe Køkkenmaskine CL 40

Læs gratis den danske manual til Robot Coupe CL 40 (13 sider) i kategorien Køkkenmaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Robot Coupe CL 40, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

CL 40

Robot-coupe USA. Inc.

P.O. Box 16625, Jackson, MS 39236-6625 - 264 South Perkins St., Ridgeland, MS 39157

e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.com

Phone : 1-800-824-1646

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance,

please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you

to use the equipment correctly. The operation manual should be kept within easy access to all users for reference and should be read completely by all first

time users of the machine.

IMPORTANT WARNING

W A R N I N G

KEEP THESE INSTRUCTIONS

N A SAFE PLACE

USE

• Never try to override the locking and safety systems.

• Never insert an object into the container where the

food is being processed.

• Never push the ingredients down with your hand.

• Do not overload the appliance.

• Never switch the appliance on when it is empty.

A8 ¾

B12

C8 ¾

D23

E13 ½

F29

G21

H16 ¼

CLEANING

• As a precaution, always unplug your appliance

before cleaning it.

• Always clean the appliance and its attachments at

the end of each cycle.

• Never immerse the motor unit in water.

• For parts made from aluminum, use cleaning

detergents intended for aluminum.

• For plastic parts , do not use detergents that are

too alkaline (e.g., containing too much caustic soda or

ammonia).

• Robot-Coupe can in no way be held responsible

for the user’s failure to follow the basic rules of

cleaning and hygiene.

MAINTENANCE

• Before opening the motor housing, it is absolutely

vital to unplug the appliance.

• Check the seals and washers regularly and ensure

that the safety devices are in good working order.

• It is particularly important to maintain and check the

attachments since most vegetables contain corrosive

agents, e.g. citric acid.

• Never operate the appliance if the power cord

or plug has been damaged or if the appliance fails to

work properly or has been damaged in any way.

• Do not hesitate to contact your local Maintenance

Service if something appears to be wrong.

UNPACKING

• Carefully remove the equipment from the packaging

and take out all the boxes or packets containing

attachments or specific items.

• WARNING-some of the parts are very sharp e. g.

blades, discs… etc.

INSTALLATION

• Install your machine on a stable solid base of

convenient operating height.

CONNECTION

• The CL 40 must be attached to standard 120 Volt

60 Hz grounded outlet NEMA 5-15. Robot Coupe

recommends ground fault type outlet be used.

HANDLING

• Always take care when handling the blades, as

they are extremely sharp.

SPECIFICATIONS

Motor Speed (rpm) Intensity (Amp)

120 V/60Hz 600 12.0

- Power shown on data plate.

ASSEMBLY PROCEDURES

• Follow the various assembly procedures carefully

(see page 6) and make sure that all the attachments

are correctly positioned.

DIMENSIONS (in inches)

Produkt Specifikationer

Mærke:	Robot Coupe
Kategori:	Køkkenmaskine
Model:	CL 40

Har du brug for hjælp?

Hvis du har brug for hjælp til Robot Coupe CL 40 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køkkenmaskine Robot Coupe Manualer

Robot Coupe CL 55 B Manual

14 Juni 2025

Robot Coupe CL 50 E Ultra Manual

14 Juni 2025

Robot Coupe CL 50 E Manual

14 Juni 2025

Robot Coupe CL55WS Manual

14 Juni 2025

Robot Coupe CL 50 Ultra Manual

14 Juni 2025

Robot Coupe CL 60 B Manual

13 Juni 2025

Robot Coupe CL 40 Manual

13 Juni 2025

Køkkenmaskine Manualer

Nyeste Køkkenmaskine Manualer

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025