Robot Coupe R 502 Manual

Robot Coupe Køkkenmaskine R 502

Læs gratis den danske manual til Robot Coupe R 502 (21 sider) i kategorien Køkkenmaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Robot Coupe R 502, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/21

16/11/2021

R 502 G • R 502 V.V. G

R 702 • R 702 V.V. • R 752 • R 752 V.V.

Robot Coupe U.S.A., Inc.

264 South Perkins, Ridgeland, MS 39157 - Phone: 800/824-1646 • 601/898-8411

email: info@robotcoupeusa.com - website: www.robot-coupe.com

New

your product

on line

16/11/2021

WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the

appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your

appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who

may use the appliance also reads them beforehand. Our equipment is designed for professional use and must not be used by children under

any circumstances.

UNPACKING

• Carefully remove the equipment from the packaging

and take out all the boxes or packets containing

attachments or specific items.

• WARNING: some of the tools are very sharp e.g.

blades, discs... etc..

• Store manuals, tools and spare parts in a safe place

available to the users of the machine

INSTALLATION

• This machine must be operated on a clean sturdy

counter or table. Keep the area around and under the

machine clear to allow air circulation. Otherwise the

motor can overheat. All four feet must be in place.

CONNECTION

• Always check that your power supply corresponds to

that indicated on the identiﬁcation plate on the motor unit

and that it can withstand the amperage.

• The unit must always be connected to a grounded

outlet with Ground Fault Circut Interrupter (GFCI)

protection device.

• Always check that the motor shaft rotates in counter

clockwise direction before the blades are installed.

HANDLING

• Always take care when handling the blades, asthey are

extremely sharp.

• Wear cut-proof gloves when handling the blades.

USE

• The machine must not be modiﬁed in any way from

its original conﬁguration.

• Never tamper with, or defeat the purpose of the

locking and safety systems.

• Do not put nonfood objects in the bowl.

• Do not leave the machine running unattended.

• The machine must be operated and stored in a

location not subject to water drips or spray or explosive

vapors.

• Should the machine malfunction or should any part

be damaged, it must not be operated until it is repaired

by a qualiﬁed technician using only genuine Robot

Coupe repair parts.

• Failure to follow these operating instructions or

attempts to operate the machine outside its design

limits may create a hazardous condition that could

damage the machine and/or injure users. Special

attention should be given to the use of the operation

controls and safety features.

• The unit is equipped with a thermal overload circuit-

breaker. If the unit overheats due to an overload

condition, it will automatically shut off. After cooling a

few minutes the thermal overload circuit-breaker may

be reset. Press the reset button located on the bottom

left front of the unit.

• Operating times of 5 minutes or longer can cause

processed food to increase to temperatures above

125° F (52° C).

• Maximum ﬁll level is ⅔ full, less if the product is very

dense or sticky.

CLEANING

• As a precaution, always unplug your appliance before

cleaning it.

• Always clean the appliance and its attachments at the

end of each cycle.

• Never immerse the motor base in water.

• For parts made from aluminum, use metal safe

detergents intended for aluminum.

• Caustic detergents used in automatic dishwashers

quickly degrade plastic parts. Hand wash plastic parts if

possible.

• Robot Coupe can in no way be held responsible for

the user’s failure to follow the basic rules of cleaning and

hygiene.

MAINTENANCE

• Do not open the motor housing. There are no

user serviceable components inside the electrical

housing. Refer control component repairs to qualiﬁed

technicians.

• Replace seals every 3 to 6 months. Lubricate with food

safe grease.

• It is particularly important to maintain and check the

attachments since certain ingredients contain corrosive

agents, e.g. citric acid.

• Never operate the appliance if the power cord or

plug has been damaged or if the appliance fails to work

properly or has been damaged in any way.

• If the machine malfunctions in any way discard any

food being processed and refer service to qualiﬁed

maintenance technicians.

IMPORTANT WARNING

WARNING

KEEP THESE INSTRUCTIONS IN A SAFE PLACE

Produkt Specifikationer

Mærke:	Robot Coupe
Kategori:	Køkkenmaskine
Model:	R 502

Har du brug for hjælp?

Hvis du har brug for hjælp til Robot Coupe R 502 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køkkenmaskine Robot Coupe Manualer

Robot Coupe R 502 Manual

20 August 2025

Robot Coupe R 20 Manual

20 August 2025

Robot Coupe R 2 N Manual

20 August 2025

Robot Coupe R 2 Dice Manual

20 August 2025

Robot Coupe CL 60 WS Manual

14 Juni 2025

Robot Coupe CL 50 Gourmet Manual

14 Juni 2025

Robot Coupe CL 55 B Manual

14 Juni 2025

Robot Coupe CL 50 E Ultra Manual

14 Juni 2025

Robot Coupe CL 50 E Manual

14 Juni 2025

Robot Coupe CL55WS Manual

14 Juni 2025

Køkkenmaskine Manualer

Nyeste Køkkenmaskine Manualer

VOX MX 1021 Manual

20 August 2025

Moulinex Bake Partner QA520B Manual

20 August 2025

VOX KR 3000 Manual

20 August 2025

Sencor STM 3638RS Manual

20 August 2025

Globe GSCS2 Manual

20 August 2025

Sencor STM 3634RD Manual

20 August 2025

Cecotec Mambo 12090 Manual

20 August 2025

VOX KR 3001 Manual

20 August 2025

Moulinex Fresh Express Plus DJ750G Manual

19 August 2025

Moulinex Masterchef Compact QA203B Manual

19 August 2025