Roland C-30 Manual

Roland Klaver C-30

Læs gratis den danske manual til Roland C-30 (2 sider) i kategorien Klaver. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Roland C-30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

C-30 Quick Manual

[Volume] knob

This adjusts the volume. When the knob is in the center position, the volume will be at the

standard level, equivalent to the volume of an acoustic harpsichord.

You can adjust the volume as appropriate for the ensemble in which you’re playing, or the

size of the room.

[Reverb] knob

This adjusts the depth of reverberation.

[Tone] knob

This adjusts the tonal character. Turning the knob toward the right will produce a thinner and

more brilliant tone; turning it toward the left will produce a thicker and more mellow tone.

By pressing the [8’ I], [8’ II], [4’], or [Lute] buttons you can select the corresponding sound

(back, front, octave up, mute).

By pressing two or three of these four buttons simultaneously, you can layer multiple

sounds so that they will be heard together.

Normally, [4’] is not used on its own; it is always pressed together with [8’ I] or [8’ II] to be layered with these sounds.

Conversely, [Lute] is a distinctive sound with a rapid decay, and is used by itself.

If you press the [Organ I] or [Organ II] button, the harpsichord sound will be switched off, and you’ll change to an organ sound.

The two types of organ sound can also be layered by pressing the buttons simultaneously.

By holding down [Temperament] and pressing [Organ II] you can select the Celesta sound. To return to the Organ II sound, once again

hold down [Temperament] and press [Organ II].

When you turn on the power, a French type harpsichord is selected for the [8’ I], [8’ II], [4’],

and [Lute] sounds.

By holding down [Function] and pressing [8’ II] you can switch to a Flemish type harpsi-

chord.

By holding down [Function] and pressing [4’] you can switch to a fortepiano.

By holding down [Function] and pressing [Lute], you can select a dynamic harpsichord

which allows you to add dynamics to the sound.

By holding down [Function] and pressing [8’ I], you can switch back to French type harpsi-

chord.

Switching the harpsichord type will not change the organ sounds.

The button's indicator will be lit red when a French type harpsichord is selected, and will be

lit orange when any other type is selected.

Press [Temperament] to select the desired temperament.

The Equal, Werckmeister, Kirnberger, Vallotti, or Meantone indicator will light to show

which temperament you’ve selected.

Play a C-E-G triad near the center of the keyboard while you switch between the tempera-

ments, and you'll notice the subtle differences in sonority.

By holding down [Function] and pressing [Organ I], you can switch to Baroque pitch (415

Hz) which is a semitone lower than usual; the [Organ I] indicator will light green.

If you once again hold down [Function] and press [Organ I], you will switch to Versailles

pitch (392 Hz) which is a whole tone lower than usual; the button's indicator will light

orange.

If you again hold down [Function] and press [Organ I] for a third time, the indicator will go

out and you will return to the usual pitch (440 Hz).

While you hold down [Function], the [Function] indicator will light green to indicate Func-

tion mode.

Volume knob, Reverb knob, Tone knob

Selecting a sound / Selecting the Celesta sound

Switching between types of harpsichord

Switching temperaments (historical tunings)

Switching to Baroque pitch

Produkt Specifikationer

Mærke:	Roland
Kategori:	Klaver
Model:	C-30
Bredde:	1100 mm
Dybde:	450 mm
Højde:	1170 mm
Vægt:	38000 g
Produktfarve:	Træ
Indbyggede højttaler(e):	Ja
Antal højttalere:	4
Udgangseffekt (RMS):	26 W
Kabler inkluderet:	Vekselstrøm
Strømforbrug (maks.):	25 W
Lydeffekter:	Efterklang
Antal taster:	61 taster
Antal toner:	6
Spjæld pedal:	Ja