Rolls MS311 Manual

Rolls Kamerastativ MS311

Læs gratis den danske manual til Rolls MS311 (2 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Rolls MS311, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
SPECIFICATIONS:
IN Connectors: XLR
OUT Connectors: XLR
Size: 5"w x 4.75"d x 1.5"h
Passive design, NO power, NO electronics and NO distortion.
Thick powder coated steel chassis..
100% Handcrafted in Salt Lake City, UT.
Rolls Corporation
Salt Lake City, UT
5/25
Push to talk or
Push to mute
Mic Stand
The MS311 PTT or PTM mic stand is a passive design.
That means NO power required, NO electronics used and
NO distortion will ever be added.
The chassis is made from .090" steel, meaning it is 3 times
thicker than most chassis. Female XLR jack for connection
to your mic and Male XLR for output.
All this and it is 100% Handcrafted in Salt Lake City, UT.
What's in the box?
1 - Made in USA MS311
1 - This owners manual
0 - Power supply (its an all pas-
sive unit)
Thank you for purchasing the MS311. We sincerely appreci-
ate the opportunity to build a product for you and participate
in your love of quality music and sound. We love what we do
and we’re happy to help. Rolls products are hand built in Salt
Lake City, Utah by people who care about high quality audio.
MS311 Mic Stand
- XLR input and output jacks
- Momentary Switch
- Bottom panel screw holes for convenient mounting
- Can function as push to talk or Push to mute
This device momentarily mutes (or talks) a microphone
signal. This function is very handy in the event of a
sneeze, cough, or other possible distracting noise. Or
when you need to control when a mic is active for an-
nouncing or paging.
MS311
MADE IN USA
www.rolls.com
Switch for changing
the orientation of the
MS311 from Push to
Talk when the switch
is in, or Push to Mute
when the switch is out.
Momentary switch
XLR jacks: Female
input, Male output
To mount the bottom chassis to a solid surface:
Remove the four screws securing the bottom panel to the top of the
chassis.
With the bottom panel removed, you will have access to two counter-
sunk holes designed for mounting.
Secure the bottom panel to the desired surface using appropriate
mounting screws (not included).
Once mounted, reassemble the chassis by reattaching the bottom
panel with the four original screws.
To mute a microphone signal using the MS311:
1. Connect a balanced XLR cable from your microphone to the female input jack on the MS311.
2. Connect another XLR cable from the male output jack on the MS311 to your next device in the signal chain.
3. Press and hold the footswitch to mute the microphone signal for as long as the switch is held.
4. Release the switch to allow the mic signal to pass through again.
The MS311 can operate in two modes:
-Push to Mute (default): Signal passes through unless the switch is held.
-Push to Talk: Signal is muted unless the switch is held.
To switch between modes, adjust the internal mode selector switch, accessible through the side of the MS311.

Produkt Specifikationer

Mærke: Rolls
Kategori: Kamerastativ
Model: MS311

Har du brug for hjælp?

Hvis du har brug for hjælp til Rolls MS311 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kamerastativ Rolls Manualer

Rolls

Rolls MS311 Manual

20 Juni 2025

Kamerastativ Manualer

Nyeste Kamerastativ Manualer

Mafell

Mafell BionicBack BB-1 Manual

13 September 2025
Vello

Vello MPH-100 Manual

12 September 2025
Vello

Vello VB-2000 Manual

12 September 2025
Hohem

Hohem iSteady MT2 Manual

11 September 2025
Adam Hall

Adam Hall SMS11PRO Manual

11 September 2025
BoomTone DJ

BoomTone DJ PARTY BAR MAXI Manual

9 September 2025
Glide Gear

Glide Gear OH 150 Manual

7 September 2025
Sevenoak

Sevenoak MicRig Manual

6 September 2025
Robus

Robus RTH-1030 Manual

5 September 2025
Sky-Watcher

Sky-Watcher CQ350-Pro Manual

5 September 2025