Safety Indications
• Cook the vegetables in a container with a lid instead of an open tray.
• Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect,
wait 10-15 minutes after turning on the power before putting food
inside the oven. In any case, the condensation disappears when the
oven reaches the cooking temperature.
• WARNING: the appliance andaccessible parts become hot during use.
Be careful not to touch anyhot parts.
• WARNING: the accessible parts can become hot when the oven is in
use.Children mustbe kept at a safe distance.
• Children under 8 must be kept at a safe distance from the appliance if
not continuously supervised.
- Remove large or coarse food residuesfrom the inside of the oven using
a damp sponge. Do not use detergents;
• Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.
• Only use the meat proberecommended for this oven.
• In ovens with meat probe it is necessary, before making the cleaning
cycle, close the hole with the nut provided. Always close the hole with
the nut when the meat probeis not used.
- Remove all accessories and the sliding rack kit (where present);
• Children must not play with the appliance. The appliance can be used
by those aged 8 or over and by those with limited physical, sensorial or
mental capacities, without experience or knowledge of the product,
only if supervised or provided with instruction as to the operationof the
appliance, in a safe waywith awarenessof the possible risks.
- Clean the oven door;
• WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.
• WARNING: before initiating the automatic cleaning cycle:
- Do not place tea towels
• Cleaning and maintenance should not be carried out by unsupervised
children.
• The oven must be switched off before removing the removable parts
and, after cleaning, reassemble them according the instructions.
EN 02
