Russell Hobbs Sensigence Intelligent RHBL2000 Manual

Russell Hobbs Blender Sensigence Intelligent RHBL2000

Læs gratis den danske manual til Russell Hobbs Sensigence Intelligent RHBL2000 (10 sider) i kategorien Blender. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Russell Hobbs Sensigence Intelligent RHBL2000, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
RHBL2000_IB_RB_FA_051120
Part No. T22-9002137
INSTRUCTIONS & WARRANTY
2
IMPORTANT SAFEGUARDS
When using this appliance, basic safety precautions should always be followed, including the following:
Read all instructions before, and follow whilst using this appliance.
1. Read all instructions before, and follow whilst using this appliance.
2. To protect against electric shock DO NOT immerse cord, plug or motor unit in water or any other liquid.
3. Do not use outdoors or in damp or moist areas.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the product by a person responsible
for their safety.
5. This appliance is not a toy. Young children should be supervised to ensure they do NOT play with the appliance.
6. Do not leave the appliance unattended whilst plugged in.
7. Always turn off and unplug from the power outlet when not in use and before assembling, disassembling or
cleaning.
8. To disconnect, set the controls to off. Turn off the wall power outlet, then grasp the plug and remove from the
wall power outlet. Never pull by the cord.
9. Do not operate any appliance with a damaged cord or plug or after the appliance has malfunctioned, or has
been dropped or damaged in any manner. Contact customer service for replacement, examination, repair or
adjustment.
10. There are no user serviceable parts. If the power cord is damaged, it must be replaced by the manufacturer or
similarly qualified person in order to avoid a hazard.
11. Do not use this appliance for other than its intended purpose. Using the appliance for other than its intended
purpose may result in personal injury.
12. Cutting blades are very sharp. Handle the blender and blade assembly with extreme care and caution when
empting the jug and during cleaning.
13. The motor will only operate if the glass jug has been fully inserted into the motor unit.
14. Before switching on, make sure that the glass jug has been assembled correctly and has been seated into the
motor unit with the lid attached. Do not start the blender without the lid and measuring cap in place otherwise
liquids/ingredients will be ejected. Always place your hand on top of the blender jug lid to hold the jug steady
when the blender starts.
15. The blender is not to be operated with an empty glass jug.
16. Hot liquids/ingredients must be never placed in the blending jug;
• Hot liquids/ingredients must not be added to blending jug as they may be ejected out of the appliance due to
sudden steaming. Ensure all liquids/ingredients are below 40C before placing them in the jug.
• Adding hot liquids/ingredients to the glass blending jug may cause the jug to break.
17. Switch off and unplug the appliance before changing accessories or touching parts that move whilst in use.
18. Do not run the motor for longer than 2 minutes, it may overheat. If further blending is required, allow a rest/
cooling period of at least 2 minutes between operations.
19. Do not use on an inclined plane or unstable surface.
20. Keep the blender and the power cord away from the edges of tables or countertops and out of reach of children
and persons with disabilities.
21. Do not place the blender on or near any heat sources.
22. Cleaning or user maintenance shall not be carried out by children without the supervision of a person
responsible for their safety.
23. Do not use accessories or attachments other than those supplied with the appliance.
24. For added safety, electrical appliances should be connected to a power outlet that is protected by a residual
current device (RCD), also often referred to as a ‘Safety Switch’. Your switchboard may already incorporate an
RCD. If unsure, call an electrician for verification and fitting if necessary.

Produkt Specifikationer

Mærke: Russell Hobbs
Kategori: Blender
Model: Sensigence Intelligent RHBL2000

Har du brug for hjælp?

Hvis du har brug for hjælp til Russell Hobbs Sensigence Intelligent RHBL2000 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Blender Russell Hobbs Manualer

Russell Hobbs

Russell Hobbs Rosetta RHMS1 Manual

25 December 2024
Russell Hobbs

Russell Hobbs Aura 21501 Manual

19 September 2024
Russell Hobbs

Russell Hobbs 24721-56 Manual

25 August 2024
Russell Hobbs

Russell Hobbs 18996 Manual

15 August 2024
Russell Hobbs

Russell Hobbs Go Create 25960 Manual

10 August 2024
Russell Hobbs

Russell Hobbs 19450-56 Manual

10 August 2024
Russell Hobbs

Russell Hobbs Aura Mix & Go Pro Manual

9 August 2024
Russell Hobbs

Russell Hobbs Velocity Pro 25720-56 Manual

6 August 2024
Russell Hobbs

Russell Hobbs Soup & Blend Digital Manual

5 August 2024
Russell Hobbs

Russell Hobbs 18087 Manual

3 August 2024

Blender Manualer

Nyeste Blender Manualer

Haier

Haier HBL7W5 001 Manual

30 Juli 2025
Ardes

Ardes Trinity ARSET01 Manual

27 Juli 2025
Ardes

Ardes Neo ARMIX02 Manual

27 Juli 2025
Panasonic

Panasonic MX-MG53C1 Manual

26 Juli 2025
Panasonic

Panasonic MX-EX1021 Manual

26 Juli 2025
Taurus

Taurus Bapi 1200 Premium Fullset Manual

26 Juli 2025
Panasonic

Panasonic MX-EX1031 Manual

26 Juli 2025
Taurus

Taurus Optima Easy 1500 Manual

25 Juli 2025
Panasonic

Panasonic MJ-M176 Manual

25 Juli 2025
Taurus

Taurus Turmix JB2000C Manual

25 Juli 2025