RYOBI A25RT03 Manual

RYOBI Fræsningsmaskine A25RT03

Læs gratis den danske manual til RYOBI A25RT03 (56 sider) i kategorien Fræsningsmaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om RYOBI A25RT03, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/56
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ROUTER TABLE
TABLE À TOUPIE
MESA FRESADORA
A25RT03
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
General Safety Rules .......................2-3
Specific Safety Rules .........................3
Symbols ..............................................4
Electrical ............................................. 5
Features ...........................................6-7
Assembly .......................................8-15
Operation .....................................16-18
Maintenance .....................................19
Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
Règles de sécurité générales ..........2-3
Règles de sécurité particulières .........3
Symboles ............................................4
Caractéristiques électriques ...............5
Caractéristiques ..............................6-7
Assemblage ...................................8-15
Utilisation .....................................16-18
Entretien ...........................................19
Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
Reglas de seguridad generales .......2-3
Reglas de seguridad específicas .......3
Símbolos ............................................4
Aspectos eléctricos ............................ 5
Características ................................6-7
Armado ..........................................8-15
Funcionamiento ...........................16-18
Mantenimiento ..................................19
Pedidos de piezas
y servicio ....................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Inch
1
0
1
2
3
Inch
1
0
1
2
3
inch
2 - English
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric shock,
fire and/or serious personal injury.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL. Carefully read the router
table operator’s manual and the manual for the particular
router you are using. Learn the applications and limitations
as well as the specific potential hazards related to this
tool.
GUARD AGAINST ELECTRICAL SHOCK BY
PREVENTING BODY CONTACT WITH GROUNDED
SURFACES. For example: pipes, radiators, ranges,
refrigerator enclosures.
KEEP GUARDS IN PLACE and in good working order.
REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
KEEP WORK AREA CLEAN. Cluttered areas and benches
invite accidents. DO NOT leave tools or pieces of wood
on the tool while it is in operation.
DO NOT USE IN DANGEROUS ENVIRONMENTS. Do
not use power tools in damp or wet locations or expose
to rain. Keep the work area well lit.
KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses and be kept a safe distance
from work area. Do not let visitors contact tool or extension
cord while operating.
MAKE WORKSHOP CHILDPROOF with padlocks,
master switches, or by removing starter keys.
DON’T FORCE THE TOOL. It will do the job better and
safer at the feed rate for which it was designed.
USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job for which it was not designed.
USE THE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition. Use only a
cord heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating. A wire
gauge size (A.W.G.) of at least 14 is recommended for an
extension cord 25 feet or less in length. If in doubt, use
the next heavier gauge. The smaller the gauge number,
the heavier the cord.
DRESS PROPERLY. Do not wear loose clothing,
neckties, or jewelry that can get caught and draw you
into moving parts. Rubber gloves and nonskid footwear
are recommended when working outdoors. Also wear
protective hair covering to contain long hair.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-resistant
lenses, they are NOT safety glasses.
SECURE WORK. Use clamps or a vise to hold work when
practical, it is safer than using your hand and frees both
hands to operate the tool.
DO NOT OVERREACH. Keep proper footing and balance
at all times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and
clean for better and safer performance. Follow instructions
for lubricating and changing accessories.
DISCONNECT TOOLS. When not in use, before servicing,
or when changing attachments, blades, bits, cutters, etc.,
all tools should be disconnected from power source.
AVOID ACCIDENTAL STARTING. Be sure switch is off
when plugging in any tool.
USE RECOMMENDED ACCESSORIES. Consult the
operator’s manual for recommended accessories. The
use of improper accessories may result in injury.
NEVER STAND ON TOOL. Serious injury could occur if
the tool is tipped or if the cutting tool is unintentionally
contacted.
CHECK DAMAGED PARTS. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect
its operation. A guard or other part that is damaged must
be properly repaired or replaced by an authorized service
center to avoid risk of personal injury.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN
THE POWER OFF. Don’t leave tool until it comes to a
complete stop.
USE THE RIGHT DIRECTION OF FEED. Feed work into
a blade, cutter, or sanding spindle against the direction
or rotation of the blade, cutter, or sanding spindle only.
PROTECT YOUR LUNGS. Wear a face or dust mask if
the cutting operation is dusty.
PROTECT YOUR HEARING. Wear hearing protection
during extended periods of operation.
DO NOT ABUSE CORD. Never carry tool by the cord or
yank it to disconnect from receptacle. Keep cord from
heat, oil, and sharp edges.
ALWAYS USE AN OUTDOOR EXTENSION CORD
MARKED “W-A” OR “W”. These cords are rated for
outdoor use and reduce the risk of electric shock.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal
sparking of the motor could ignite fumes.
INSPECT TOOL CORDS PERIODICALLY. If damaged,
have repaired by a qualified service technician at an
authorized service facility. The conductor with insulation
having an outer surface that is green with or without yellow

Produkt Specifikationer

Mærke: RYOBI
Kategori: Fræsningsmaskine
Model: A25RT03

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI A25RT03 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fræsningsmaskine RYOBI Manualer

RYOBI

RYOBI A25RT03 Manual

31 August 2025
RYOBI

RYOBI One+ RTR18 Manual

10 Marts 2024

Fræsningsmaskine Manualer

Nyeste Fræsningsmaskine Manualer

AL-KO

AL-KO 32.4 Basic Care Manual

28 August 2025
Mafell

Mafell FM 1650 NC-LO Manual

24 August 2025
Vonroc

Vonroc S2_WC502AC Manual

23 August 2025
Metabo

Metabo OFV 18 LTX BL 12 Manual

20 August 2025
Toolson

Toolson PRO-OF 1255 Manual

19 August 2025
Milwaukee

Milwaukee Max HP 5619-20 Manual

13 August 2025
DeWalt

DeWalt DCE555 Manual

9 August 2025
DeWalt

DeWalt DWE625 Manual

8 August 2025
Metabo

Metabo LF 850 S Manual

8 August 2025
Metabo

Metabo MFE 65 Manual

7 August 2025