RYOBI One+ PBLID01 Manual

RYOBI Skruemaskine One+ PBLID01

Læs gratis den danske manual til RYOBI One+ PBLID01 (24 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om RYOBI One+ PBLID01, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT BRUSHLESS IMPACT
DRIVER
CLÉ À CHOCS DE 18 V SANS BALAI
DESTORNILLADOR DE IMPACTO DE 18 V
SIN ESCOBILLAS
PBLID01
WARNING: To reduce the risk
of injury, the user must read and un-
derstand the operator’s manual before
using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings
.............................. 2-3
Impact Driver Safety Warnings ............ 3
Symbols
...............................................4
Features
............................................... 5

Assembly .............................................5
Operation ......................................... 5-7
Maintenance ........................................7
Illustrations ...................................... 8-9
Parts Ordering
and Service
......................... Back page
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques ........ 2-3
Avertissements de sécurité relatifs
clé à chocs
..........................................3
Symboles
............................................. 4
Caractéristiques
..................................5

Assemblage ......................................... 5
Utilisation ........................................ 5-7
Entretien ..............................................7
Illustrations ...................................... 8-9
Commande de pièces
et dépannage
.................... Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctrica
..................... 2-3
Advertencias de seguridad de
destornillador de impacto ...................3
Símbolos
.............................................4
Características
....................................5

Armado ................................................5
Funcionamiento ............................... 5-7
Mantenimiento .....................................7
Illustraciones ................................... 8-9

Pedidos de piezas
y servicio
........................ Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Use battery only with charger listed. For use with 18V
lithium-ion battery packs, see tool/appliance/battery
pack/charger correlation supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be

Produkt Specifikationer

Mærke: RYOBI
Kategori: Skruemaskine
Model: One+ PBLID01

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI One+ PBLID01 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skruemaskine RYOBI Manualer

RYOBI

RYOBI RSD4 Manual

31 Juli 2025
RYOBI

RYOBI FVD01 Manual

16 Juni 2025
RYOBI

RYOBI One+ RID18C1 Manual

11 Februar 2025
RYOBI

RYOBI PCL250 Manual

4 Januar 2025
RYOBI

RYOBI PCL212 Manual

4 Januar 2025
RYOBI

RYOBI One+ RSD18 Manual

3 Januar 2025
RYOBI

RYOBI One+ RIW18C Manual

16 November 2024
RYOBI

RYOBI One+ PSBID02 Manual

6 September 2024
RYOBI

RYOBI One+ PSBID01 Manual

6 September 2024
RYOBI

RYOBI One+ PBLID01 Manual

6 September 2024

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Draper

Draper D20 55343 Manual

1 Oktober 2025
NEO Tools

NEO Tools 14-010 Manual

29 September 2025
Yato

Yato YT-09512 Manual

29 September 2025
Metabo

Metabo SBE 650/13 Manual

29 September 2025
Hazet

Hazet 9213-1000LB Manual

28 September 2025
NEO Tools

NEO Tools 14-502 Manual

28 September 2025
Hazet

Hazet 9012ECO Manual

28 September 2025
Hazet

Hazet 9212-1000LB Manual

28 September 2025
Yato

Yato YT-09702 Manual

28 September 2025
Yato

Yato YT-09525 Manual

27 September 2025