Sagemcom F@st 3896 SUM Manual

Sagemcom Ikke kategoriseret F@st 3896 SUM

Læs gratis den danske manual til Sagemcom F@st 3896 SUM (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Sagemcom F@st 3896 SUM, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Sagemcom F@ST 3896 SUM
Quick Setup Guide
Next Generation High Speed DOCSIS3.1 residential gateway
PACKAGE CONTENTS
The package contains the following items:
• F@ST 3896 SUM residential gateway
• Power adapter
• Safety and regulatory information sheet
• This guide
INSTALLING THE PRODUCT
Connecting your F@ST 3896 SUM to your
service provider’s network
1. Connect one end of the coaxial cable
(not included) to a cable outlet
2. Connect the other end of the coaxial cable
to the cable port of the F@ST 3896 SUM
Powering on the F@ST 3896 SUM
1. After connecting the coaxial cable, plug
the DC connector of the provided power supply
adapter into the F@ST 3896 SUM DC input port
2. Plug the power supply adapter into a nearby available AC power outlet
3. Check that the power LED is ON
4. After a few minutes, the DS, US and Online LED will turn on sequentially
5. Once the Online LED is solid green, your F@ST 3896 SUM residential gateway is connected
to the service provider’s network
Note: depending on network conditions, it may take several minutes for the home gateway
to come online. If the DS and US LEDs start blinking simultaneously, your F@ST 3896 SUM is
undergoing firmware upgrade. Do not power off the unit or unplug any cable until the
upgrade is complete.
Connecting the F@ST 3896 SUM to your local area network (LAN)
1.
Using an Ethernet cable (not included), connect one end to the LAN port of the F@ST 3896 SUM.
2.
Connect the other end of the cable to an available RJ45 connector on your computer.
3.
Check that the LAN LED of the F@ST 3896 SUM turns on. It may blink; this is normal and indicates
network activity.
4. Check that the computer connected to the LAN port is assigned an IP address by the
gateway and can reach the internet. You may have to check the device configuration to ensure
that DHCP is enabled.
Coaxial cable connection
Power connection

Produkt Specifikationer

Mærke: Sagemcom
Kategori: Ikke kategoriseret
Model: F@st 3896 SUM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sagemcom F@st 3896 SUM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Sagemcom Manualer

Sagemcom

Sagemcom F@st 3896 SUM Manual

22 August 2024
Sagemcom

Sagemcom RAC2V1S Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ORNO

ORNO OR-ZL-1678 Manual

15 Juni 2025
LiftMaster

LiftMaster 041-0405-000 Manual

15 Juni 2025
CDN

CDN TMW1 Manual

15 Juni 2025
Bradley

Bradley S19-500 Manual

15 Juni 2025
Vestil

Vestil FE-4-72 Manual

15 Juni 2025
Powr-Flite

Powr-Flite PFX1080 Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner BassKick 707 Manual

15 Juni 2025
Marshall

Marshall VSC-100 Manual

15 Juni 2025
Xiaomi

Xiaomi Smart Electric Toothbrush T501 Manual

15 Juni 2025
Scarlett

Scarlett SC-SM10S53 Manual

15 Juni 2025