When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, do not immerse cord, plugs, or the
appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near
4. Unplug from outlet when not in use and before cleaning.
5. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to Salton for examination, repair or adjustment. See Warranty.
6. The use of accessories or attachments not recommended by Salton may
8. Do not let cord hang over edge of table or counter, or touch hot surfaces.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. Prior to connecting or disconnecting plug from wall outlet, turn any control to
11. This appliance is for Household Use Only. Do not use appliance for other
12. Do not leave unit unattended while in use.
13. Avoid contacting moving parts and cutting blades.
14. Let the Strainer come to a complete stop before removing the Top Cover.
15. Never put your fingers or other objects into the Food Chute.
16. Check that the control is ‘Off’ before plugging unit into the wall outlet. To
disconnect, press the ‘Off’ button then remove the plug from the wall outlet.
17. Always make sure that the Top Cover is locked securely in place before the
unit is plugged into the outlet. Do not unlock the Top Cover while the Juice
Extractor is in operation.
18. Make sure that the motor stops completely and the units is unplugged before
19. The appliance is equipped with a safety interlock system that prevents it from
operating unless the Juice Extractor or the Blender is in place correctly.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify the plug in any way.
